- Motors are designed in flat shape and in light weight
- A special magnetic circuit design was employed newly. By this design, these motors are in flat shape, and in lighter weight than conventional standard AC motors.
- This series have 61 mm² (2.4 in²). 80 mm² (3.1 in²). 90 mm² (3.5 in²) Flange sizes.
- Compact designed Driver
- "Palm Mini PLUS" Type is the smallest, (for 6 W - 40 W)
- "Simple" Type is a driver of components mounted on a PCB. (for 6 W-15 W)
- "High power Simple" Type Low-cost circuit-board more
- Motors are designed in flat shape and in light weight
- A special magnetic circuit design was employed newly. By this design, these motors are in flat shape, and in lighter weight than conventional standard AC motors.
- This series have 61 mm² (2.4 in²). 80 mm² (3.1 in²). 90 mm² (3.5 in²) Flange sizes.
- Compact designed Driver
- "Palm Mini PLUS" Type is the smallest, (for 6 W - 40 W)
- "Simple" Type is a driver of components mounted on a PCB. (for 6 W-15 W)
- "High power Simple" Type Low-cost circuit-board type driver. (25 W\40 W)
- Wide Ranged Speed Control
- Wide range (200 r/min - 2500 r/min), stepless speed control. "High power Simple" Type. (200 r/min - 2000 r/min)
- Very steady characteristics (Feed back control employed).
- Speed pulse output
- Speed pulse output can be used for speed monitoring, simplified position control...
- "Palm Mini PLUS" Type: 30 ppr
- "Simple" "High power Simple" Type: 5ppr dual signal (120° phase difference)
- Direction of rotation signal output
- Direction of rotation can be monitored by this signal. ("Simple" type needs an external circuit.)
- Alarming
- At an over-load condition, the motor stops and an alarm signal is output.
- Gear Head
- Low-cost gear head for FY series is also available.
- Rotor Cover (option) available
- An aluminum heat sink (size: 200 mm x 200 mm, thickness: 2 mm or more) is required.
Type |
N/A High Power Simple Motors |
Product Type |
N/A High Power Simple Type Motor |
Series |
N/A FYD |
Motor Frame Size |
N/A 80 x 80 mm3.1 x 3.1 in |
Shaft Specification |
N/A Plain Shaft |
Rated Speed |
N/A 1500 r/min |
Speed Control Range |
N/A 200 to 2300 r/min |
Rated Voltage |
N/A 24 V |
Rated Output |
N/A 25 W |
Max. Instantaneous Torque (in 5 sec.) |
N/A 200 mN·m (1500 r/min) 300 oz·in (600 r/min) |
Speed Setting Method |
N/A (1) Speed setting by external speed setter (Sold separately: model code Q-R10KB) (2) Speed setting by external voltage supply 0~10V |
Speed Variation (Against Load ±1%) |
N/A 0~rated torque at rated voltage and speed |
Speed Variation (Against Voltage ±1%) |
N/A DC 24 V ± 10 % at rated speed, no load |
Speed Variation (Against Temperature ±1%) |
N/A 20 ± 20ºC at rated voltage and speed, no load |
Input Signal |
N/A H : Open collector L : GND (0~0.8V) Run, Brake, F/R IN, Alarm RST |
Output Signal |
N/A Alarm, HU Out, HV Out Open Collector Output DC 30 V Max. 10 MA Max. |
Speed Pulse (Pulse/Revolution) |
N/A 5 |
Max. Average Current Rated |
N/A 2.3 A |
Max. Peak Current Rated |
N/A 10 A |
Protection Functions |
N/A
Over load protection When an exceeding torque than rated is applied to motor for more than about 5 sec, Stop motor and outputs "L" from "ALARM" |
Operation Temperature |
N/A 0~40ºC (no condensation) continuous duty. The motor flange surface temp. must be 80ºC Max. (Ambient temperature 40ºC without heat sink) |
Motor Dielectric Strength |
N/A Withstand for 1 min. under AC500V 50Hz (Between case and coil) |
Motor Insulation Resistance |
N/A 10 MO MIN. (Between case and coil by DC500V tester) |
Number of Poles |
N/A 10 |
Rated Power |
N/A 25 W |
|
|
|
|
|
|
|
N/A Custom Designs |
