Contact USA Rep Organizations In Your AreaSee List on the Contact US tab
Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com
Product NavigatorSearch By Specification Search By Keyword
Shop
Request Information
  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.
Unit of Measure

Product Type

 N/A DC Brush Motor

Series

 N/A DMN37

Frame Size

 N/A 80 x 80 mm3.15 x 3.15 in

Gear Ratio

 N/A 500

Rated Torque

 N/A 556 oz·in3.9 N·m

Speed

 N/A 10 r/min

Voltage

 N/A 12 V

Weight

 N/A 880 g1.9 lb

L1

 N/A 96.7 mm3.807 in

L2

 N/A 42 mm1.654 in

Bolt

 N/A M5 x 60 mmM5 x 2.362 in

Note

 N/A When ordering, please write the motor model and gearbox model numbers separately, as in the following example:
DMN37B8HPB (Pinion shaft motor)
8DG_ (Gearbox)
Rotation of gearbox shaft is in reverse of rotation of motor.


Outline


DMN37 8DG Series DC Brush Motors with Continuous Operation

DMN37 8DG Series DC Brush Motors with Continuous Operation (DMN37B8HPA)

Motor Selection Guide