Contact USA Rep Organizations In Your AreaSee List on the Contact US tab
Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com
Product NavigatorSearch By Specification Search By Keyword
Shop
Request Information
  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.
Unit of Measure

Product Type

 N/A DC Brush Motor

Series

 N/A DMN37

Frame Size

 N/A 61 x 61 mm2.402 x 2.402 in

Gear Ratio

 N/A 25

Rated Torque

 N/A 102 oz·in0.72 N·m

Speed

 N/A 144 r/min

Voltage

 N/A 24 V

L

 N/A 108.7 mm4.280 in

Weight

 N/A 640 g1.4 lb

Note

 N/A 6DG gearbox are available with either 4.5 mm diameter mounting holes or M4 x 6mm tapped holes.
  • Gearboxes with 4.5 mm diameter mounting holes are available from stock.
    When ordering, please write the motor model and gearbox model numbers separately, as in the following example:
    DMN37B6HFP_ (Pinion shaft motor)
    6DG( )F(Gearbox)
  • Gearboxes with M4 x 6 mm tapped mounting holes are available on request.
    When ordering, please write the combine motor and gearbox model, as in the following example : DMN37B6H( )F_
  • Enter the required reduction ratio in the ( )
  • Enter ther required voltage A or B in the _


Outline


DMN37 6DGF Series DC Brush Motors with Continuous Operation

Motor Selection Guide