ISO 9001:2015 Certified

Product Navigator

Search By Specification
Search By Keyword
Shop
  • Compact size, high power (0.7 W-26 W).
  • Variety of line ups (224 mode in all).
  • For variety of gear heads (32 Dia-80 Sq and others).
Features:
  • Long-life: Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output.
  • High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.
Unit of Measure

Product Type

N/A Motor with Gearbox 6DG

Series

N/A DME60

Model Code

N/A SB

Frame Size

N/A 61 x 61 mm2.402 x 2.402 in

Gear Ratio

N/A 100

Rated Voltage

N/A 24 V

Rated Output

N/A 13 W

Current Rating

N/A 1000 mA1.00 A

Rated Torque

N/A 0.98 mN·m138.87 oz·in

Rated Speed

N/A 46.8 r/min

Note

N/A Rotation of gearbox shaft is in reverse of rotation of motor
6DG gearboxes are available with either 4.5 mm diameter mounting holes or M4 x 6 mm tapped holes.
  • Gearboxes with 4.5 mm diameter mounting holes are available from stock. When ordering, please write the motor model and gearbox model numbers separately, as in the following example: DME60B6HPB (Pinion Shaft Motor) 6DG_ (Gearbox)
  • Gearbox with M4 x 6 mm tapped mounting holes are available on request. When ordering, please write the combine motor and gearbox model as in the following example: DME60B6H_B


a1553.jpg


DME60 Series Motors with Gearbox 6DG (DME60S6HPB)

Gear-Head Design

Motor Selection Guide

^