Japanese Products Corp. - DMN37 8DGF Series DC Brush Motors with Continuous Operation

Contact USA Rep Organizations In Your AreaSee List on the Contact US tab

Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com

Product NavigatorSearch By Specification Search By Keyword Shop

Long-life : Intermittent operation over 1 million cycles with optimized brush design.
Continuous operating life of 3000 hours.
High output: High heat dissipation and heat resistance achieves higher output
High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
Low noise and increased insulation due to new resin brush holders.
Large selection of gear heads and reduction ratios are available to meet all needs.
Also available with magnetic revolution sensor and noise filter.

Request Information

Unit of Measure

Items	DMN37J8HFPB-8DG3F DMN37 8DGF Series DC Brush Motors with Continuous Operation Request Quote	DMN37J8HFPB-8DG3.6F DMN37 8DGF Series DC Brush Motors with Continuous Operation Request Quote	DMN37J8HFPB-8DG5F DMN37 8DGF Series DC Brush Motors with Continuous Operation Request Quote	DMN37J8HFPB-8DG6F DMN37 8DGF Series DC Brush Motors with Continuous Operation Request Quote	DMN37J8HFPB-8DG7.5F DMN37 8DGF Series DC Brush Motors with Continuous Operation Request Quote
Product Type	N/A DC Brush Motor
Series	N/A DMN37
Frame Size	N/A 80 x 80 mm3.15 x 3.15 in
Gear Ratio	N/A 3	N/A 3.6	N/A 5	N/A 6	N/A 7.5
Rated Torque	N/A 13.5 oz·in0.10 N·m	N/A 15.3 oz·in0.11 N·m	N/A 22.3 oz·in0.16 N·m	N/A 26.4 oz·in0.19 N·m	N/A 33.4 oz·in0.24 N·m
Speed	N/A 1200 r/min	N/A 1000 r/min	N/A 720 r/min	N/A 600 r/min	N/A 480 r/min
Voltage	N/A 24 V
Weight	N/A 840 g1.9 lb
L1	N/A 96.7 mm3.807 in
L2	N/A 32 mm1.260 in
Bolt	N/A M5 x 50 mmM5 x 1.969 in
Dimensions	N/A Outline
Additional Information	N/A DMN37 8DGF Series DC Brush Motors with Continuous Operation (DMN37J8HFPB) Motor Selection Guide
Customize	N/A Custom Designs