Vibration (5Hz to 2kHz) |
N/A 20 G |
Electrostatic Discharge, IEC 61000-4-2 |
N/A ± 4 kV |
Maximum Axial Shaft Play |
N/A ± 0.010 in |
Maximum Shaft Eccentricity Plus Radial Play |
N/A 0.004 in |
Maximum Acceleration |
N/A 250000 rad/sec² |
Maximum RPM |
N/A CPR < 2500: minimum value of ((18 x 10^6) / CPR) and (60000) rpmCPR > 2500 and <5000:(21.6 x 10^6) / CPR rpmCPR > 5000: (43.2 x 10^6) / CPR rpm |
Typical Product Weight |
N/A 1.28 oz |
Codewheel Moment of Inertia |
N/A 8.9 x 10^-5 for bore < 12mm oz-in-s2 4.0 x 10^-4 for bore 12 mm oz-in-s2 |
Hub Set Screw |
N/A #3-48 or #4-48 |
Hex Wrench Size |
N/A 0.050 in |
Encoder Base Plate Thickness |
N/A 0.135 in |
3 Mounting Screw Size |
N/A #0-80 |
2 Mounting Screw Size |
N/A #2-56 or #4-40 |
3 Screw Bolt Circle Diameter (3) |
N/A 0.823 ± 0.005 in |
2 Screw Bolt Circle Diameter |
N/A 0.750 ± 0.005 in1.280 ± 0.005 in1.812 ± 0.005 in |
Required Shaft Length (4) |
N/A 0.445 to 0.525 inWith E-option (3): 0.445 to 0.670 inWith H-option: > 0.445 in |
Index Alignment to Hub Set Screw |
N/A 180 ± Typical mechanical degrees |
Torque - Hub Set Screw to Shaft |
N/A 2-3 in·lb |
Torque - Cover (4-40 screws through cover into base) |
N/A 2-4 in·lb |
Torque - Base to Mounting Surface |
N/A 4-6 in·lb |
Torque - Base to Mounting Adapter Plate |
N/A 4-6 in·lb |
Torque - Adapter Plate to Mounting Surface |
N/A 4-6 in·lb |
Torque - Module to Base |
N/A 3.5-4 in·lb |
|
|
|
N/A Custom Designs |
