Item # KT86LM1-551, KT Series, 3 phase Hybrid Stepping Motor (1.2 Degree/Step)

Contact USA Rep Organizations In Your AreaSee List on the Contact US tab

Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com

Product NavigatorSearch By Specification Search By Keyword Shop

Request Information

Drive Circuit is simplified because the motor is driven with star winding connection
High torque is obtained at low speed with a mirco-step driver
Ultra-low vibration and low noise achieved with our micro-step driver
With these drivers, motor step angle is set by selecting from 1/1, 1/2, 1/4, or 1/8

Unit of Measure

Type	N/A KT Series, 3 phase Hybrid Stepping Motor
Product Type	N/A Stepper Motor
Series	N/A 3 Phase KT
Motor Frame Size	N/A NEMA 34
Shaft Type	N/A Single Shaft
No. of Phases	N/A 3
Step Angle	N/A 1.2 deg./step
Voltage	N/A 5.4 V
Current per 2 Phase	N/A 3.0 A
Winding Resistance/2 Phase	N/A 1.8 Ω
Inductance/2 Phase	N/A 18.0 mH
Holding Torque	N/A 278 oz·in2000 mN·m
Detent Torque	N/A 13.9 oz·in0.1 mN·m
Standard Size	N/A 86 x 61 mm3.38 x 2.40 in.
Rotor Inertia	N/A 670 g·cm²3.67 oz·in²
Drive Method	N/A Bipolar
Weight	N/A 1.6 g3.52 lb
Insulation Class	N/A Jis Class E (120ºC/248ºF) (UL Value : Class B 130ºC/266ºF)
Insulation Resistance (Motor Section)	N/A 500 VDC, 100 MO min.
Dielectric Strength	N/A 500 VAC, 50 HZ, 1 min.
Operating Temperature Range	N/A 0 to 50 ºC
Allowable Temperature Rise	N/A 70 ºK