Contact USA Rep Organizations In Your AreaSee List on the Contact US tab
Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com
Product NavigatorSearch By Specification Search By Keyword
Shop
Request Information
  • Dimensions: 3.8 x 3.7 x 1.3 in (97 x 95 x 33 mm)
  • Higher static pressure suitable for spot cooling
  • Multi-blade design makes quieter operation noise
  • Compact sized by a special construction
  • Sensor installed model
Unit of Measure

Type

 N/A E1033H/Y Series Super Silent Blowers 97X95X33

Product Type

 N/A Super Silent Blower with Sensor

Series

 N/A DC Centrifugal Blowers

Material

 N/A Bearing : Both Side Shielded Ball Bearing Impeller : ABS and PBT synthetic resins Venturi : ABS and PBT Synthetic Resins

Motor

 N/A Brushless DC Motor, Protection type : Current shut off by detecting lock state, automatically reset

Dimensions

 N/A 97 x 95 x 33 mm3.8 x 3.7 x 1.3 in

Rated Voltage (±10%)

 N/A 12 V

Max Airflow

 N/A 23 cfm0.64 m³/min

Max Static Pressure

 N/A 185 Pa0.74 inH2O

Noise

 N/A 43 dB

Weight

 N/A 170 g

Operating Temperature

 N/A -20 ~ +70 ºC

Qty/Box

 N/A 50

Carton Size

 N/A 45 x 38 x 22 cm

Qty/Pallet

 N/A 800

Standard Pallet Size

 N/A 790 x 930 x 1020 cm

Box/Pallet

 N/A 16

Note

 N/A
  • Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification
  • The characteristics are the values at rated voltage (12 V or 24 V): and normal temperature and humidity.
  • AM-04 becomes a lock detection sensor (S) type or pulse sensor (P) type in accordance with the connector connection method.
  • Purchase a sensor output cord optionally available or the customer shall provide a cord with equivalent specifications it a sensor function is desired.
  • NIDEC SERVO can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed specifications, and other modifications. Please contact NIDEC SERVO during your product planning and development stage.
  • The listed products are registered in the following overseas standards files, UL/cUL: E48889, TUV: R50004410
  • PWM (pulse width modulation) allowing for variable speed control is available in some models.


Standard Airflow & Static Pressure Characteristics


a1834.jpg


Wiring Diagram