Contact USA Rep Organizations In Your AreaSee List on the Contact US tab
Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com
Product NavigatorSearch By Specification Search By Keyword
Shop
Request Information
  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.
Unit of Measure

Product Type

 N/A DC Brush Motor

Series

 N/A DMN37

Frame Size

 N/A 80 x 80 mm3.15 x 3.15 in

Gear Ratio

 N/A 30

Rated Torque

 N/A 121 oz·in0.86 N·m

Speed

 N/A 120 r/min

Voltage

 N/A 24 V

Weight

 N/A 940 g2.1 lb

L1

 N/A 106.7 mm4.201 in

L2

 N/A 42 mm1.654 in

Bolt

 N/A M5 x 60 mmM5 x 2.362 in

Note

 N/A When ordering, please write the motor model and gearbox model numbers separately, as in the following example:
DMN37J8HFPB (Pinion shaft motor)
8DG_F (Gearbox)
Enter the required reduction ratio in the _
Rotation of gearbox shaft is in reverse of rotation of motor.


Outline


DMN37 8DGF Series DC Brush Motors with Continuous Operation (DMN37J8HFPB)

Motor Selection Guide