Contact USA Rep Organizations In Your AreaSee List on the Contact US tab
Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com
Product NavigatorSearch By Specification Search By Keyword
Shop
  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.
Unit of Measure

Product Type

N/A DC Brush Motor

Series

N/A DMN37

Frame Size

N/A 80 x 80 mm3.15 x 3.15 in

Gear Ratio

N/A 12.5

Rated Torque

N/A 55.6 oz·in0.40 N·m

Speed

N/A 288 r/min

Voltage

N/A 24 V

Weight

N/A 840 g1.9 lb

L1

N/A 96.7 mm3.807 in

L2

N/A 32 mm1.260 in

Bolt

N/A M5 x 50 mmM5 x 1.969 in

Note

N/A When ordering, please write the motor model and gearbox model numbers separately, as in the following example:
DMN37J8HFPB (Pinion shaft motor)
8DG_F (Gearbox)
Enter the required reduction ration in the _


Outline


DMN37 8DGF Series DC Brush Motors with Continuous Operation (DMN37J8HFPB)

Motor Selection Guide