Contact USA Rep Organizations In Your AreaSee List on the Contact US tab
Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com
Product NavigatorSearch By Specification Search By Keyword
Shop
Request Information
  • Motors are designed small and high performance
  • We recently released a special magnetic circuit design motor. This motor design is smaller and has a higher performance than conventional FED, FYD series motors.
  • Compact design Driver - "Palm Mini R" Type is the smallest. (20 W, 40 W only)
  • Wide range (200 r/min-2500 r/min 60 W:65 r/min-2500 r/min), stepless speed control.
  • Very steady characteristics (Feed back control employed).
  • Speed pulse output can be used for speed monitoring, simplified position control...
  • Direction of rotation can be monitored by this signal.
  • At an over-load condition, the motor stops and an alarm signal is output.
Unit of Measure

Type

 N/A Palm Mini R Type Motors 61X61

Product Type

 N/A DC Motor

Series

 N/A FHD Outer Rotor

Motor Frame Size

 N/A 61 x 61 mm2.4 x 2.4 in

Rated Torque

 N/A 98 mN·m14 oz·in

Rated Speed

 N/A 2000 r/min

Speed Control Range

 N/A 100 to 2500 r/min

Shaft Specification

 N/A Plain Shaft Type

Rated Output

 N/A 20 W

Max. Instantaneous Torque (in 5 sec.)

 N/A 150 mN·m (2000 r/min) 21 oz·in (2000 r/min)

Speed Setting Method

 N/A (1) Speed setting by internal speed setter (2) Speed setting by external speed setter (Sold separately: model code Q-R10KB) (3) Speed setting by external voltage supply 0~10V

Speed Setting

 N/A 300±5 %

Speed Variation (Against Load ±1%)

 N/A 0~rated torque at rated voltage and speed

Speed Variation (Against Voltage ±1%)

 N/A Rated voltage ± 10 % at rated speed, no load

Speed Variation (Against Temperature ±1%)

 N/A 20 ± 20ºC at rated voltage and speed, no load

Input Signal

 N/A H : Open collector HT: Rotor stop position maintenance L : GND (0~1.5V) Run, Brake, F/R IN, HT, INT

Output Signal

 N/A 2 mA. Max. Alarm Out, Speed Out, F/R Out Open Collector Output DC 30 V Max.

Speed Pulse (Pulse/Revolution)

 N/A 42

Max. Average Current Rated

 N/A 1.8 A

Max. Peak Current Rated

 N/A 9 A

Acceleration Time Adjustment

 N/A 0.5 to 10 seconds in the condition of rated speed, no load and no inertia. The acceleration time is changed by the load and the inertia value.

Rotor Stop Position Maintenance

 N/A Rated torque x 0.5

Protection Functions

 N/A Overheat protection and Hall IC signal disconnection protection. Overload protection, High & Low voltage protection, Overspeed protection function.

Operation Temperature

 N/A 0~40ºC (no condensation) continuous duty. The motor flange surface temp. must be 80ºC Max. (Ambient temperature 40ºC without heat sink)

Motor Dielectric Strength

 N/A Withstand for 1 min. under AC500V 50Hz (Between case and coil)

Motor Insulation Resistance

 N/A 10 MO MIN. (20W, 40W) (Between case and coil by DC500V tester)

Note

 N/A Although the rotation speed range in the high-speed area expands more than that shown in the above table, the allowable torque may decrease. Refer to the torque rotation speed graph.

Rated Voltage

 N/A 24 V

Number of Poles

 N/A 14

Rated Power

 N/A 20 W

Image

 N/A
FHD Series Brushless DC Motors


Speed Torque Characteristics

Speed Torque Characteristics


a2566.jpg


a2205.jpg

Distinguishing Features

FH6PF20H-D3.jpg

FH6PF20H-D3-.jpg

FH6S20R-D3.jpg

FHD Series - Palm Mini R Type Motors 61X61 (FHD6S40)

Model Code