Item # KT86LM1-551, KT Series, 3 phase Hybrid Stepping Motor (1.2 Degree/Step)

Drive Circuit is simplified because the motor is driven with star winding connection
High torque is obtained at low speed with a mirco-step driver
Ultra-low vibration and low noise achieved with our micro-step driver
With these drivers, motor step angle is set by selecting from 1/1, 1/2, 1/4, or 1/8

Unit of Measure

Specifications | Torque Curve | Dimensions | Additional Information | Customize

Type	N/A KT Series, 3 phase Hybrid Stepping Motor
Product Type	N/A Stepper Motor
Series	N/A 3 Phase KT
Motor Frame Size	N/A NEMA 34
Shaft Type	N/A Single Shaft
No. of Phases	N/A 3
Step Angle	N/A 1.2 deg./step
Voltage	N/A 5.4 V
Current per 2 Phase	N/A 3.0 A
Winding Resistance/2 Phase	N/A 1.8 Ω
Inductance/2 Phase	N/A 18.0 mH
Holding Torque	N/A 278 oz·in2000 mN·m
Detent Torque	N/A 13.9 oz·in0.1 mN·m
Standard Size	N/A 86 x 61 mm3.38 x 2.40 in.
Rotor Inertia	N/A 670 g·cm²3.67 oz·in²
Drive Method	N/A Bipolar
Weight	N/A 1.6 g3.52 lb
Insulation Class	N/A Jis Class E (120ºC/248ºF) (UL Value : Class B 130ºC/266ºF)
Insulation Resistance (Motor Section)	N/A 500 VDC, 100 MO min.
Dielectric Strength	N/A 500 VAC, 50 HZ, 1 min.
Operating Temperature Range	N/A 0 to 50 ºC
Allowable Temperature Rise	N/A 70 ºK