-
Stepping Motors
stepping-motors
-
KF42 Series 42mm 2-Phase Stepper Motors (1.8 Degree/Step) - NEMA 17
Features:
- A motor size down, achieving the torque of one size up. Expanding the rotor diameter to its maximum limit within a new "flattened" structure allows the 42motor profile to be maintained.
- Large Rotor
- High Torque
-
2 Phase Round KA Series
2 Phase Round KA Series
(155) -
3 Phase Stepping Motors
-
2 Phase Hybrid Square KH Series
- New 2 phase Control System allows Stepping motor to operate at High Speeds
- 0.72 can be achieved (same as 5 phase motors) and can be divided by 80 (or 0.009 deg)
- Unique out of step position can be detected (only for motor shaft speeds greater than 500 rpm)
- Available using our 2 phase Square size 17 and size 23 stepper motors.
-
KV28 KA59 Flat Type Stepper Motors (1.8 Degree/Step)
-
2 Phase Closed Loop FWD Series
- New 2 phase Control System allows Stepping motor to operate at High Speeds
- 0.72 can be achieved (same as 5 phase motors) and can be divided by 80 (or 0.009 deg)
- Unique out of step position can be detected (only for motor shaft speeds greater than 500 rpm)
- Available using our 2 phase Square size 17 and size 23 stepper motors.
-
KH56 Series 2-Phase Hybrid Stepping Motors (1.8 Degree/Step) - Nema 23
Features
- Stronger torque generated in higher speed zone (KH56KM2-901 generates 1.2 times torque of our previous model at 1200 r/min. speed)
- Lowered Vibration by increased stiffness of body construction (lowered by 10% than our previous model)
- Improved Efficiency (1.1 times of our previous model, by high grade materials)
- Strong torque and quieter running by a unique tooth profile.
- Extended applicable range by standardized specification & higher speed.
