Contact USA Rep Organizations In Your AreaSee List on the Contact US tab
Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com
Product NavigatorSearch By Specification Search By Keyword
Shop
Request Information
Features:
  • Improved Dynamic Torque (1.2 times torque of our previous model is generated at 300 r/min, on model : KH42JM2-901)
  • Lowered Vibration & Noise Level (by increased stiffness of body construction)
  • Improved Efficiency (1.1 times of our previous model, by high grade materials.)
  • Strong torque and quieter running by a unique tooth profile.
  • Extended applicable range by standardized specification & higher speed.
Unit of Measure

Type

 N/A 42mm, 2-Phase Stepping Motors (1.8 Degree/Step) - Nema 17

Rotor Inertia

 N/A 0.5 oz·in²98 B·cm²

Product Type

 N/A Stepper Motor

Series

 N/A 2 Phase Square KH

Motor Frame Size

 N/A NEMA 17

Motor Size

 N/A 42

Motor Length

 N/A 2.13 in54 mm

Shaft Specification

 N/A Double Shaft

Step Angle

 N/A 1.8 deg./step

Voltage per Phase

 N/A 3.22 V

Current per Phase

 N/A 1.4 A

Resistance per Phase

 N/A 2.3 Ω

Inductance per Phase

 N/A 5.0 mH

Shaft Length

 N/A 0.63 in16 mm

Holding Torque

 N/A 81 oz·in570 mN·m

Detent Torque

 N/A 4.2 oz·in30 mN·m

Rotor Inertia

 N/A 98 B·cm²0.5 oz·in²

Winding Method

 N/A Bipolar

Insulation Class

 N/A Class E equivalent

Insulation Resistance

 N/A 100 MO min. at 500 V DC (at normal temp. & humidity, between lead and case)

Dielectric Strength

 N/A 500 VAC, 50 Hz for 1 minute (at normal temp. & humidity, between lead and case)

Ambient Temperature Range

 N/A -10 ~ +50 ºC

Storage Temperature Range

 N/A -20 ~ +70 ºC

Humidity Range in Operation and Storage

 N/A 5 ~ 95 % RH (noncondensing)

Max. Temperature Rise (By resistance method)

 N/A 70 ºK

Options Available

 N/A Lead wire Assembly (Part# KH42LBS300)

Holding Torque

 N/A 570 mN·m81 oz·in

Series Code

 N/A KH42

Note

 N/A Minimum Order Quantity May Apply


KH4254-B951.jpg


Semi Standard Model Dimensions


a1128.jpg

Max. Allowable Load/Runout for Motor Shaft