Contact USA Rep Organizations In Your AreaSee List on the Contact US tab
Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com
Product NavigatorSearch By Specification Search By Keyword
Shop
Request Information
Features:
  • Improved Dynamic Torque (1.2 times torque of our previous model is generated at 300 r/min, on model : KH42JM2-901)
  • Lowered Vibration & Noise Level (by increased stiffness of body construction)
  • Improved Efficiency (1.1 times of our previous model, by high grade materials.)
  • Strong torque and quieter running by a unique tooth profile.
  • Extended applicable range by standardized specification & higher speed.
Unit of Measure

Type

 N/A 42mm, 2-Phase Stepping Motors (1.8 Degree/Step) - Nema 17

Rotor Inertia

 N/A 0.3 oz·in²48 B·cm²

Product Type

 N/A Stepper Motor

Series

 N/A 2 Phase Square KH

Motor Frame Size

 N/A NEMA 17

Motor Size

 N/A 42

Motor Length

 N/A 1.50 in38 mm

Shaft Specification

 N/A Single Shaft

Step Angle

 N/A 1.8 deg./step

Voltage per Phase

 N/A 3.08 V

Current per Phase

 N/A 1.4 A

Resistance per Phase

 N/A 2.2 Ω

Inductance per Phase

 N/A 1.9 mH

Shaft Length

 N/A 0.63 in16 mm

Holding Torque

 N/A 37 oz·in260 mN·m

Detent Torque

 N/A 2.3 oz·in16 mN·m

Rotor Inertia

 N/A 48 B·cm²0.3 oz·in²

Winding Method

 N/A Unipolar

Insulation Class

 N/A Class E equivalent

Insulation Resistance

 N/A 100 MO min. at 500 V DC (at normal temp. & humidity, between lead and case)

Dielectric Strength

 N/A 500 VAC, 50 Hz for 1 minute (at normal temp. & humidity, between lead and case)

Ambient Temperature Range

 N/A -10 ~ +50 ºC

Storage Temperature Range

 N/A -20 ~ +70 ºC

Humidity Range in Operation and Storage

 N/A 5 ~ 95 % RH (noncondensing)

Max. Temperature Rise (By resistance method)

 N/A 70 ºK

Options Available

 N/A Lead wire Assembly (Part# KH42LUS300)

Holding Torque

 N/A 260 mN·m37 oz·in

Series Code

 N/A KH42

Note

 N/A Minimum Order Quantity May Apply


KH4238.jpg


Semi Standard Model Dimensions


a1127.jpg

Max. Allowable Load/Runout for Motor Shaft