Contact USA Rep Organizations In Your AreaSee List on the Contact US tab
Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com
Product NavigatorSearch By Specification Search By Keyword
Shop
Request Information
  • Compact size, high power (0.7W-26W).
  • Variety of line ups (224 mode in all).
  • For variety of gear heads (32 Dia-80 Sq and others).
Features:
  • Long-life: Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 1000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output.
  • High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.
Unit of Measure

Product Type

 N/A DC Motor with Gearbox 6DG

Series

 N/A DME25

Model Code

 N/A BB

Motor Frame Size

 N/A 61 x 49.5 mm2.402 x 1.949 in

Rated Voltage

 N/A 24 V

Rated Output

 N/A 3.0 W

Current Rating

 N/A 230 mA0.23 A

Gear Ratio

 N/A 1800

Rated Speed

 N/A 4.2 r/min

Rated Torque

 N/A 138.87 oz·in0.98 N·m

Note

 N/A 6DG gearbox are available with either 4.5 mm diameter mounting holes or M4 x 6 mm tapped holes.
  • Gearboxes with 4.5 mm diameter mounting holes are available from stock. When ordering, please write the motor model and gearbox model numbers separately, as in the following example;
    DME25B6HPB (Pinion shaft motor)
    6DG_ (Gearbox)
  • Gearboxes with M4 x 6 mm tapped mounting holes are available on request. When ordering, please write the combine motor and gearbox model, as in the following example ; DME25B6H_B
  • Rotation of gearbox shaft is in reverse of rotation of motor


a1468.jpg


Gear-Head Design

Motor Selection Guide

With-Gearbox-6DG.jpg