UTH Series Torque Motor (4~12 W) with Speed Control
H Mark II Series - Standard AC & Gear Motors
This is a kind of capacitor-run, single-phase induction motor which has characteristics somewhat different from those of induction motor and reversible motor.
When driven at 115V, the duty time is 5 minutes, but, at 70V, the duty is continuous and the motor does not overheat even if the output shaft is locked from outside.
Further, by changing voltage, motor speed and torque change simultaneously, the motor can be kept in continuous running, therefore, at a desirable voltage and torque (at below 70V).
Because this motor puts forth its maximum torque at starting as mentioned above, start, stop and rotation reversing can be done without difficulty.
When driven at 115V, the duty time is 5 minutes, but, at 70V, the duty is continuous and the motor does not overheat even if the output shaft is locked from outside.
Further, by changing voltage, motor speed and torque change simultaneously, the motor can be kept in continuous running, therefore, at a desirable voltage and torque (at below 70V).
Because this motor puts forth its maximum torque at starting as mentioned above, start, stop and rotation reversing can be done without difficulty.
Unit of Measure
Items |
/Asset/UIH8P15N.jpg UTH6S3N UTH Series Torque Motor (4~12 W) with Speed Control |
/Asset/UIH8P15N.jpg UTH7S6N UTH Series Torque Motor (4~12 W) with Speed Control |
/Asset/UIH8P15N.jpg UTH8S10N UTH Series Torque Motor (4~12 W) with Speed Control |
/Asset/UIH8P15N.jpg UTH6PF3N UTH Series Torque Motor (4~12 W) with Speed Control |
/Asset/UIH8P15N.jpg UTH6PF3N (at 70 V) UTH Series Torque Motor (4~12 W) with Speed Control |
|||||
Product Type | N/A Torque Motor | |||||||||
Motor Type | N/A Torque Motor | |||||||||
Speed Control | N/A With Speed Control | |||||||||
Series | N/A UTH | |||||||||
Motor Frame Size | N/A 2.40 x 2.40 in | N/A 2.76 x 2.76 in | N/A 3.15 x 3.15 in | N/A 2.40 x 2.40 in | N/A 2.40 x 2.40 in | |||||
Rated Output | N/A 4 W | N/A 8 W | N/A 12 W | N/A 4 W | N/A 1 W | |||||
Shaft Specification | N/A Straight Shaft Motor | N/A Straight Shaft Motor | N/A Straight Shaft Motor | N/A Pinion Shaft Motor | N/A Pinion Shaft Motor | |||||
No. of Poles | N/A 4 | N/A 4 | N/A 4 | N/A 4 | N/A | |||||
Speed at Max. Output | N/A 900 rpm | |||||||||
Starting Torque | N/A 11 oz·in800 g·cm | N/A 19 oz·in1350 g·cm | N/A 28 oz·in2000 g·cm | N/A 11 oz·in800 g·cm | N/A 4.2 oz·in300 g·cm | |||||
Starting Current | N/A 0.5 A | N/A 0.62 A | N/A 0.85 A | N/A 0.5 A | N/A 0.34 A | |||||
Input at Start | N/A 56 W | N/A 68 W | N/A 85 W | N/A 56 W | N/A 23 W | |||||
No Load Speed | N/A 1500 rpm | N/A 1500 rpm | N/A 1500 rpm | N/A 1500 rpm | N/A 1300 rpm | |||||
Time Rating | N/A 5 Minutes | N/A 5 Minutes | N/A 5 Minutes | N/A 5 Minutes | N/A Continuous | |||||
Capacitor | N/A 5.0 µF | N/A 6.0 µF | N/A 7.0 µF | N/A 5.0 µF | N/A 5.0 µF | |||||
Voltage | N/A 115 V | |||||||||
Frequency | N/A 60 Hz | |||||||||
Phase | N/A Single | |||||||||
Duty Cycle | N/A 5 Minutes | |||||||||
Insulation | N/A Class A | |||||||||
Torque Curves |
N/A
a1448.jpg |
N/A
a1449.jpg |
N/A
a1450.jpg |
N/A
a1448.jpg |
N/A
a1448.jpg |
|||||
Dimensions |
N/A
Straight Shaft Motor |
N/A
Straight Shaft Motor |
N/A
Straight Shaft Motor |
N/A
Pinion Shaft Motor |
N/A
|
|||||
Additional Information |
N/A
Dynamic Characteristics Motor Selection Guide Motor/Gearhead Model Coding Motor-Size Chart UTH Series Synchronous Motor |
|||||||||
Customize | N/A Custom Designs | |||||||||
|