Elinco International JPC, Inc.Japanese Products Corp.
Elinco International JPC, Inc. – Corporate Headquarters
1525 Kings Highway East
Fairfield, CT 06824
Phone: 203.334.7537
Fax: 203.334.7792
Email: info@e-jpc.com
Website: www.e-jpc.com
Print Back
  • Compact size, high power (0.7 W-26 W).
  • Variety of line ups (224 mode in all).
  • For variety of gear heads (32 Dia-80 Sq and others).
Features:
  • Long-life: Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 1000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output.
  • High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.
Unit of Measure

Specifications

Product Type

 N/A DC Motor with Gearbox 60G

Series

 N/A DME34

Model Code

 N/A SA

Frame Size

 N/A 61 x 61 mm

Gear Ratio

 N/A 50

Rated Voltage

 N/A 12 V

Rated Output

 N/A 1.3 W

Current Rating

 N/A 200 mA0.2 A

Rated Speed

 N/A 66 r/min

Rated Torque

 N/A 19.44 oz·in0.14 N·m

Note

 N/A 6DG gearbox are available with either 4.5 mm diameter mounting holes or M4 x 6 mm tapped holes.
  • Gearboxes with 4.5 mm diameter mounting holes are available from stock. When ordering, please write the motor model and gearbox model numbers separately, as in the following example :DME34B6HPB (Pinion Shaft Motor) 6DG_ (Gearbox)
  • Gearboxes with M4 x 6 mm tapped mounting holes are available on request. When ordering, please write the combine motor and gearbox model, as in the following example: DME34B6H_B

Dimensions


a1515.jpg

Additional Information


DME34B6HP.jpg

Gear-Head Design

Motor Selection Guide

Customize

N/A Custom Designs