Item # DME33S6HP30B & 6DG30, DME33 Series Motors with Gearbox 6DG On Japanese Products Corp.

Features:

Long-life: Intermittent operation over 1 million cycles with optimized brush design.
Continuous operating life of 1000 hours.
High output: High heat dissipation and heat resistance achieves higher output.
High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
Low noise and increased insulation due to new resin brush holders.
Large selection of gear heads and reduction ratios are available to meet all needs.
Also available with magnetic revolution sensor and noise filter.

Unit of Measure

Specifications | Dimensions | Additional Information | Customize

Product Type	N/A DC Motor with Gearbox 6DG
Series	N/A DME33
Model Code	N/A SB
Frame Size	N/A 61 x 49.5 mm2.402 x 1.949 in
Diameter	N/A 1.26 in32 mm
Gear Ratio	N/A 30
Rated Output	N/A 0.7 W
Rated Voltage	N/A 24 V
Current Rating	N/A 60 mA0.06 A
Rated Speed	N/A 150 r/min
Rated Torque	N/A 4.58 oz·in0.032 N·m
Note	N/A 6DG gearbox are available with either 4.5 mm diameter mounting holes or M4 x 6 mm tapped holes. Gearboxes with 4.5 mm diameter mounting holes are available from stock. When ordering, please write the motor model and gearbox model numbers separately, as in the following example; DME33B6HPB (Pinion shaft motor) 6DG_ (Gearbox) Gearboxes with M4 x 6 mm tapped mounting holes are available on request. When ordering, please write the combine motor and gearbox model, as in the following example ; DME33B6H_B Rotation of gearbox shaft is in reverse of rotation of motor