Motor Frame Size |
N/A 32 x 18 mm |
Hall Effect Electrical Angle |
N/A 120 º |
Radial Play at 4 Newton (N) Load |
N/A 0.02 mm |
End Play at 4 Newton (N) Load |
N/A 0.14 mm |
Maximum Radial Force |
N/A 14 N |
Maximum Axial Force |
N/A 4.8 N |
Insulation Class |
N/A Class B |
Alternating Current (AC) Dielectric Strength for One Minute |
N/A 500 V |
Minimum Insulation Resistance for 500 Volt (V) Direct Current (DC) Voltage |
N/A 100 MO |
Pin Number |
N/A 1 2 3 4 5 6 7 8 |
| Electric Function for Pin Number 11 | N/A Vcc |
Electric Function for Pin Number 2 |
N/A HALL C |
Electric Function for Pin Number 3 |
N/A HALL A |
Electric Function for Pin Number 4 |
N/A HALL B |
| Electric Function for Pin Number 52 | N/A GND |
Electric Function for Pin Number 6 |
N/A Motor W |
Electric Function for Pin Number 7 |
N/A Motor V |
Electric Function for Pin Number 8 |
N/A Motor U |
Number of Poles |
N/A 8 |
Number of Phase |
N/A 3 |
Direct Current (DC) Rated Voltage |
N/A 48 V |
No Load Speed |
N/A 4800 rpm |
Tolerance (±) for No Load Speed |
N/A 10 % |
No Load Current |
N/A 0.077 A |
Rated Current |
N/A 0.257 A |
Rated Torque |
N/A 25 mN·m |
Rated Speed |
N/A 2950 rpm |
Tolerance (±) for Rated Speed |
N/A 10 % |
Rated Torque |
N/A 25 mN·m |
Rated Power |
N/A 8 W |
Peak Torque |
N/A 74 mN·m |
Peak Current |
N/A 1 A |
Tolerance (±) for Peak Current |
N/A 10 % |
Line to Line Resistance at 25 Degree Celsius (ºC) Temperature |
N/A 53 O |
Tolerance (±) for Line to Line Resistance at 25 Degree Celsius (ºC) Temperature |
N/A 10 % |
Line to Line Inductance |
N/A 28 mH |
Tolerance (±) for Line to Line Inductance |
N/A 20 % |
Torque Constant |
N/A 96 N·m/A |
Tolerance (±) for Line to Torque Constant |
N/A 10 % |
Back Electromotive Force (EMF) Constant |
N/A 7 Vrms/Krpm |
Tolerance (±) for Line to Back Electromotive Force (EMF) |
N/A 10 % |
Rotor Inertia |
N/A 35 g·cm² |
Motor Mass |
N/A 50 g |
|
|
|
N/A Custom Designs |
- 1 Power supply positive of r hall : +5 VDC to +24 VDC
- 2 Power supply negative of Hall
