An Elinco slotless brushless DC (SBLDC) motor consists of a stator winding positioned inside a laminated stator ring (without conventional teeth) and a permanent magnet motor. This provides more peripheral space for the stator winding.
This also allows more magnet surface area and more air gap flux. Powerful rare earth magnets provide high torque to motor weight ratios. The absence of stator teeth enables more winding copper and power density which can develop more torque. It also eliminates torque cogging and minimizes audible noise.
This also allows more magnet surface area and more air gap flux. Powerful rare earth magnets provide high torque to motor weight ratios. The absence of stator teeth enables more winding copper and power density which can develop more torque. It also eliminates torque cogging and minimizes audible noise.
Unit of Measure
Product Type |
N/A Brushless DC Motor |
Lead Number |
N/A 1 2 3 4 5 6 7 8 9 |
Color for Lead Number 1 |
N/A Red |
Color for Lead Number 2 |
N/A Brown |
Color for Lead Number 3 |
N/A White |
Color for Lead Number 4 |
N/A Orange |
Color for Lead Number 5 |
N/A Black |
Color for Lead Number 6 |
N/A Yellow |
Color for Lead Number 7 |
N/A Blue |
Color for Lead Number 8 |
N/A Green |
Color for Lead Number 9 |
N/A Green Yellow |
Lead Gauge for Lead Number 1 |
N/A American Wire Gauge (AWG) 26 Underwriters Laboratories (UL) 1332 |
Lead Gauge for Lead Number 2 |
N/A American Wire Gauge (AWG) 26 Underwriters Laboratories (UL) 1332 |
Lead Gauge for Lead Number 3 |
N/A American Wire Gauge (AWG) 26 Underwriters Laboratories (UL) 1332 |
Lead Gauge for Lead Number 4 |
N/A American Wire Gauge (AWG) 26 Underwriters Laboratories (UL) 1332 |
Lead Gauge for Lead Number 5 |
N/A American Wire Gauge (AWG) 26 Underwriters Laboratories (UL) 1332 |
Lead Gauge for Lead Number 6 |
N/A American Wire Gauge (AWG) 18 Underwriters Laboratories (UL) 10393 |
Lead Gauge for Lead Number 7 |
N/A American Wire Gauge (AWG) 16 American Wire Gauge (AWG) 18 American Wire Gauge (AWG) 20 American Wire Gauge (AWG) 22 |
Lead Gauge for Lead Number 8 |
N/A American Wire Gauge (AWG) 18 Underwriters Laboratories (UL) 10393 |
Electric Function for Lead Number 1 |
N/A Voltage Collector Collector (Vcc) |
Electric Function for Lead Number 2 |
N/A Hall A |
Electric Function for Lead Number 3 |
N/A Hall B |
Electric Function for Lead Number 4 |
N/A Hall C |
Electric Function for Lead Number 5 (Hall Negative) |
N/A GND (Ground) (Hall Negative) |
Electric Function for Lead Number 6 |
N/A Motor U |
Electric Function for Lead Number 7 |
N/A Motor V |
Electric Function for Lead Number 8 |
N/A Motor W |
Electric Function for Lead Number 9 |
N/A GND (Ground) |
Voltage for Lead Number 1 |
N/A +5 to +24 |
Winding Type |
N/A Star |
Hall Effect Electrical Angle |
N/A 120 º |
Radial Play at 450 Gram (g) Load |
N/A 0.02 mm |
End Play at 450 Gram (g) Load |
N/A 0.08 mm |
Maximum Radial Force at 20 Millimeter (mm) from the Flange |
N/A 20 N |
Maximum Axial Force |
N/A 8 N |
Insulation Class |
N/A Class H |
Alternating Current (AC) Dielectric Strength1 | N/A 2500 V |
Minimum Insulation Resistance for 500 Volt (V) Direct Current (DC) Voltage |
N/A 100 MO |
Number of Poles |
N/A 2 |
Number of Phase |
N/A 3 |
Direct Current (DC) Rated Voltage |
N/A 320 V |
Loading Speed |
N/A 43270 rpm |
Motor Frame Size |
N/A 27 x 113 mm |
Rated Torque |
N/A 460 mN·m |
Rated Torque |
N/A 450 mN·m |
Rated Speed |
N/A 32000 rpm |
Rated Power |
N/A 1500 W |
Peak Torque |
N/A 1125 mN·m |
Peak Current |
N/A 17 A |
Line to Line Resistance at 25 Degree Celsius (ºC) Temperature |
N/A 9 O |
Line to Line Inductance |
N/A 3.8 mH |
Torque Constant |
N/A 70.6 mN·m/A |
Back Electromotive Force (EMF) Constant |
N/A 5.23 Vrms/Krpm |
Rotor Inertia |
N/A 10.2 g·cm² |
Body Length |
N/A 113.5 mm |
Weight |
N/A 320 g |
|
N/A
Custom Designs |
- 1 3 seconds, limit of 5mA.