An Elinco slotless brushless DC (SBLDC) motor consists of a stator winding positioned inside a laminated stator ring (without conventional teeth) and a permanent magnet motor. This provides more peripheral space for the stator winding.
This also allows more magnet surface area and more air gap flux. Powerful rare earth magnets provide high torque to motor weight ratios. The absence of stator teeth enables more winding copper and power density which can develop more torque. It also eliminates torque cogging and minimizes audible noise.
This also allows more magnet surface area and more air gap flux. Powerful rare earth magnets provide high torque to motor weight ratios. The absence of stator teeth enables more winding copper and power density which can develop more torque. It also eliminates torque cogging and minimizes audible noise.
Unit of Measure
Product Type |
N/A Brushless DC Motor |
Lead Number |
N/A 1 2 3 4 5 6 7 8 9 |
Color for Lead Number 1 |
N/A Red |
Color for Lead Number 2 |
N/A Blue |
Color for Lead Number 3 |
N/A Green |
Color for Lead Number 4 |
N/A White |
Color for Lead Number 5 |
N/A Black |
Color for Lead Number 6 |
N/A Yellow |
Color for Lead Number 7 |
N/A Red |
Color for Lead Number 8 |
N/A Black |
Color for Lead Number 9 |
N/A White Yellow |
Lead Gauge for Lead Number 1 |
N/A American Wire Gauge (AWG) 26 |
Lead Gauge for Lead Number 2 |
N/A American Wire Gauge (AWG) 26 |
Lead Gauge for Lead Number 3 |
N/A American Wire Gauge (AWG) 26 |
Lead Gauge for Lead Number 4 |
N/A American Wire Gauge (AWG) 26 |
Lead Gauge for Lead Number 5 |
N/A American Wire Gauge (AWG) 26 |
Lead Gauge for Lead Number 6 |
N/A American Wire Gauge (AWG) 16 American Wire Gauge (AWG) 18 American Wire Gauge (AWG) 20 American Wire Gauge (AWG) 22 |
Electric Function for Lead Number 1 |
N/A Voltage Collector Collector (Vcc) (Hall Positive) |
Electric Function for Lead Number 2 |
N/A Hall U |
Electric Function for Lead Number 3 |
N/A Hall V |
Electric Function for Lead Number 4 |
N/A Hall W |
Electric Function for Lead Number 5 (Hall Negative) |
N/A GND (Ground) (Hall Negative) |
Electric Function for Lead Number 6 |
N/A U |
Electric Function for Lead Number 7 |
N/A V |
Electric Function for Lead Number 8 |
N/A W |
Electric Function for Lead Number 9 |
N/A GND (Ground) |
Voltage for Lead Number 1 |
N/A +5 to +24 |
Winding Type |
N/A Star |
Hall Effect Electrical Angle |
N/A 120 º |
Radial Play at 450 Gram (g) Load |
N/A 0.02 mm |
End Play at 450 Gram (g) Load |
N/A 0.08 mm |
Maximum Radial Force at 10 Millimeter (mm) from The Flange |
N/A 28 N |
Maximum Axial Force |
N/A 12 N |
Insulation Class |
N/A Class B Class F Class H |
Direct Current (DC) Dielectric Strength1 | N/A 2500 V |
Minimum Insulation Resistance for 500 Volt (V) Direct Current (DC) Voltage |
N/A 100 MO |
Number of Poles |
N/A 2 |
Number of Phase |
N/A 3 |
Direct Current (DC) Rated Voltage |
N/A 110 V |
Motor Frame Size |
N/A 49 x 90 mm |
Rated Torque |
N/A 140 mN·m |
Rated Torque |
N/A 140 mN·m |
Rated Speed |
N/A 13000 rpm |
Continuous Running Torque |
N/A 168 mN·m |
Rated Power |
N/A 200 W |
Peak Torque |
N/A 420 mN·m |
Peak Current |
N/A 7.6 A |
Line to Line Resistance at 20 Degree Celsius (ºC) Temperature |
N/A 3.4 O |
Line to Line Inductance |
N/A 2.5 mH |
Torque Constant |
N/A 74 mN·m/A |
Back Electromotive Force (EMF) Constant |
N/A 5.5 Vrms/Krpm |
Rotor Inertia |
N/A 110 g·cm² |
Body Length |
N/A 90 mm |
Weight |
N/A 1.1 kg |
|
N/A
Custom Designs |
- 1 3 seconds, limit of 5mA.