Contact USA Rep Organizations In Your AreaSee List on the Contact US tab
Contact USA Inside SalesCatherine Topar
Ph: 203-334-7537
Fx: 203-334-7792
Email: ctopar@e-jpc.com
Product NavigatorSearch By Specification Search By Keyword
Shop
Request Information
  • Compact in size but very powerful.
  • By minimizing cogging torque, operating noise & vibration are suppressed to the minimum level.
  • Excellent response by inner rotor construction.
Unit of Measure

Type

 N/A High Power Simple Type Motors 61X61

Product Type

 N/A DC Motor

Series

 N/A FHD

Motor Frame Size

 N/A 61 x 61 mm2.4 x 2.4 in

Rated Torque

 N/A 200 mN·m28 oz·in

Rated Speed

 N/A 2000 r/min

Speed Control Range

 N/A 200 to 2500 r/min

Shaft Specification

 N/A Pinion Shaft Type

Rated Output

 N/A 40 W

Max. Instantaneous Torque (in 5 sec.)

 N/A 290 mN·m (500 r/min) 42 oz·in (500 r/min)

Speed Setting Method

 N/A (1) Speed setting by external speed setter (Sold separately: model code Q-R10KB) (2) Speed setting by external voltage supply 0~10V

Speed Setting

 N/A 300±5 %

Speed Variation (Against Load ±1%)

 N/A 0~rated torque at rated voltage and speed

Speed Variation (Against Voltage ±1%)

 N/A Rated voltage ± 10 % at rated speed, no load

Input Signal

 N/A H : Open collector L : GND (0~0.8V) Run, Brake, F/R IN, Alarm RST

Output Signal

 N/A Alarm, HU Out, HV Out Open Collector Output DC 30 V Max. 10 MA Max.

Speed Pulse (Pulse/Revolution)

 N/A 7

Max. Average Current Rated

 N/A 3.1 A

Max. Peak Current Rated

 N/A 10 A

Operation Temperature

 N/A 0~40ºC (no condensation) continuous duty. The motor flange surface temp. must be 80ºC Max. (Ambient temperature 40ºC without heat sink)

Motor Dielectric Strength

 N/A Withstand for 1 min. under AC500V 50Hz (Between case and coil)

Motor Insulation Resistance

 N/A 10 MO MIN. (20W, 40W) (Between case and coil by DC500V tester)

Note

 N/A Although the rotation speed range in the high-speed area expands more than that shown in the above table, the allowable torque may decrease. Refer to the torque rotation speed graph.

Rated Voltage

 N/A 24 V

Speed Variation (Against Temperature ±3%)

 N/A 20 ±20ºC at rated voltage and speed, no load

Protection Functions

 N/A Over load protection
When an exceeding torque than rated is applied to motor for more than about 5 sec., Stop motor and outputs "L" from "ALARM" (20W, 40W) "ALARM OUT".
To release alarm: Input "L" in the ALARM RST or Turn off the power supply more than 1 min. period.

Extended Application Range

N/A Possible to couple with gear head directly

Number of Poles

 N/A 14

Rated Power

 N/A 40 W


FHD6P40 ST CURVE.jpg


Outline


a1299.jpg

Distinguishing Features

FHD Series - Palm Mini R Type Motors 61X61 (FHD6S40)

Model Code