ISO 9001:2015 Certified

Product Navigator

Search By Specification
Search By Keyword
Shop
  • Motors are designed small and high performance
  • We recently released a special magnetic circuit design motor. This motor design is smaller and has a higher performance than conventional FED, FYD series motors.
  • Compact design Driver - "Palm Mini R" Type is the smallest. (20 W, 40 W only)
  • Wide range (200 r/min-2500 r/min 60 W:65 r/min-2500 r/min), stepless speed control.
  • Very steady characteristics (Feed back control employed).
  • Speed pulse output can be used for speed monitoring, simplified position control...
  • Direction of rotation can be monitored by this signal.
  • At an over-load condition, the motor stops and an alarm signal is output.
Unit of Measure

Type

N/A Palm Mini R Type Motors 61X61

Product Type

N/A DC Motor

Series

N/A FHD

Motor Frame Size

N/A 61 x 61 mm2.4 x 2.4 in

Shaft Specification

N/A Pinion Shaft Type

Rated Voltage

N/A 24 V

Rated Voltage

N/A 24 V

Rated Output

N/A 40 W

Rated Torque

N/A 200 mN·m28 oz·in

Rated Speed

N/A 2000 r/min

Speed Control Range

N/A 100 to 2500 r/min

Max. Instantaneous Torque (in 5 sec.)

N/A 42 oz·in (500 r/min) 290 mN·m (500 r/min)

Speed Setting Method

N/A (1) Speed setting by internal speed setter (2) Speed setting by external speed setter (Sold separately: model code Q-R10KB) (3) Speed setting by external voltage supply 0~10V

Speed Setting

N/A 300±5 %

Speed Variation (Against Load ±1%)

N/A 0~rated torque at rated voltage and speed

Speed Variation (Against Voltage ±1%)

N/A Rated voltage ± 10 % at rated speed, no load

Speed Variation (Against Temperature ±1%)

N/A 20 ± 20ºC at rated voltage and speed, no load

Input Signal

N/A H : Open collector HT: Rotor stop position maintenance L : GND (0~1.5V) Run, Brake, F/R IN, HT, INT

Output Signal

N/A 2 mA. Max. Alarm Out, Speed Out, F/R Out Open Collector Output DC 30 V Max.

Speed Pulse (Pulse/Revolution)

N/A 42

Max. Average Current Rated

N/A 3.1 A

Max. Peak Current Rated

N/A 10 A

Protection Functions

N/A Overheat protection and Hall IC signal disconnection protection. Overload protection, High & Low voltage protection, Overspeed protection function.

Operation Temperature

N/A 0~40ºC (no condensation) continuous duty. The motor flange surface temp. must be 80ºC Max. (Ambient temperature 40ºC without heat sink)

Motor Dielectric Strength

N/A Withstand for 1 min. under AC500V 50Hz (Between case and coil)

Motor Insulation Resistance

N/A 10 MO MIN. (20W, 40W) (Between case and coil by DC500V tester)

Note

N/A Minimum Order Quantity May Apply

Max. Instantaneous Torque at 500 r/min (in 5 sec.)

N/A 290 mN·m42 oz·in

Acceleration Time Adjustment

N/A 0.5 to 10 seconds in the condition of rated speed, no load and no inertia. The acceleration time is changed by the load and the inertia value.

Rotor Stop Position Maintenance

N/A Rated torque x 0.5

Peak Current

N/A 10 A


Speed Torque Characteristics

Speed Torque Characteristics


a2563.jpg


a2205.jpg

Distinguishing Features

FH6PF20H-D3.jpg

FH6PF20H-D3-.jpg

FHD Series - Palm Mini R Type Motors 61X61 (FHD6S40)

Model Code

^