Item # DMN37B8HPA-8DG7.5, DMN37 8DG Series DC Brush Motors with Continuous Operation On Japanese Products Corp.

Long-life : Intermittent operation over 1 million cycles with optimized brush design.
Continuous operating life of 3000 hours.
High output: High heat dissipation and heat resistance achieves higher output
High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
Low noise and increased insulation due to new resin brush holders.
Large selection of gear heads and reduction ratios are available to meet all needs.
Also available with magnetic

Unit of Measure

Specifications | Dimensions | Additional Information | Customize

Specifications

Product Type	N/A DC Brush Motor
Series	N/A DMN37
Frame Size	N/A 80 x 80 mm3.15 x 3.15 in
Gear Ratio	N/A 7.5
Rated Torque	N/A 12.7 oz·in0.089 N·m
Speed	N/A 627 r/min
Voltage	N/A 12 V
Weight	N/A 780 g1.7 lb
L1	N/A 86.7 mm3.413 in
L2	N/A 32 mm1.260 in
Bolt	N/A M5 x 50 mmM5 x 1.967 in
Note	N/A When ordering, please write the motor model and gearbox model numbers separately, as in the following example: DMN37B8HPB (Pinion shaft motor) 8DG_ (Gearbox)

Dimensions

Outline

Additional Information

DMN37 8DG Series DC Brush Motors with Continuous Operation

DMN37 8DG Series DC Brush Motors with Continuous Operation (DMN37B8HPA)

Motor Selection Guide

Customize

N/A Custom Designs

Specifications

Product Type

Series

Frame Size

Gear Ratio

Rated Torque

Speed

Voltage

Weight

L1

L2

Bolt

Note

Dimensions

Additional Information

Customize