Print Back
This is a kind of capacitor-run, single-phase induction motor which has characteristics somewhat different from those of induction motor and reversible motor.

When driven at 115V, the duty time is 5 minutes, but, at 70V, the duty is continuous and the motor does not overheat even if the output shaft is locked from outside.

Further, by changing voltage, motor speed and torque change simultaneously, the motor can be kept in continuous running, therefore, at a desirable voltage and torque (at below 70V).

Because this motor puts forth its maximum torque at starting as mentioned above, start, stop and rotation reversing can be done without difficulty.
Gear Heads for UIH Series Induction Motors (0.5~3 W) (UIH8P15N)
Unit of Measure
1 

Item #

Rated Output

Shaft Specification

Starting Torque

Starting Current

Input at Start

No Load Speed

UTH6S3N N/A 4 W N/A Straight Shaft Motor N/A 11 oz·in800 g·cm N/A 0.5 A N/A 56 W N/A 1500 rpm
UTH7S6N N/A 8 W N/A Straight Shaft Motor N/A 19 oz·in1350 g·cm N/A 0.62 A N/A 68 W N/A 1500 rpm
UTH8S10N N/A 12 W N/A Straight Shaft Motor N/A 28 oz·in2000 g·cm N/A 0.85 A N/A 85 W N/A 1500 rpm
UTH6PF3N N/A 4 W N/A Pinion Shaft Motor N/A 11 oz·in800 g·cm N/A 0.5 A N/A 56 W N/A 1500 rpm
UTH6PF3N (at 70 V) N/A 1 W N/A Pinion Shaft Motor N/A 4.2 oz·in300 g·cm N/A 0.34 A N/A 23 W N/A 1300 rpm
UTH7PF6N N/A 8 W N/A Pinion Shaft Motor N/A 19 oz·in1350 g·cm N/A 0.62 A N/A 68 W N/A 1500 rpm
UTH7PF6N (at 70 V) N/A 2.5 W N/A Pinion Shaft Motor N/A 6.2 oz·in450 g·cm N/A 0.40 A N/A 25 W N/A 1300 rpm
UTH8PF10N N/A 12 W N/A Pinion Shaft Motor N/A 28 oz·in2000 g·cm N/A 0.85 A N/A 85 W N/A 1500 rpm
UTH8PF10N (at 70 V) N/A 3.0 W N/A Pinion Shaft Motor N/A 9.7 oz·in700 g·cm N/A 0.55 A N/A 33 W N/A 1300 rpm
Unit of Measure
1