Elinco International JPC, Inc.Japanese Products Corp.
Elinco International JPC, Inc. – Corporate Headquarters
1525 Kings Highway East
Fairfield, CT 06824
Phone: 203.334.7537
Fax: 203.334.7792
Email: info@e-jpc.com
Website: www.e-jpc.com
Print Back
  • Compact size, high power (0.7 W-26 W).
  • Variety of line ups (224 mode in all).
  • For variety of gear heads (32 Dia-80 Sq and others).
Features:
  • Long-life: Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 2000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output.
  • High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.
DME37 Series Motors with Gearbox 8DGF
Dimensions<!---DME44B8DGF--->
Unit of Measure
1 

Item #

Model Code

Frame Size

Gear Ratio

Rated Voltage

Rated Output

Current Rating

Rated Speed

DME44B8HPB&8DG25F N/A BB N/A 80 x 80 mm3.15 x 3.15 in N/A 25 N/A 24 V N/A 14.8 W N/A 940 mA0.94 A N/A 144 r/min
DME44B8HPB&8DG30F N/A BB N/A 80 x 80 mm3.15 x 3.15 in N/A 30 N/A 24 V N/A 14.8 W N/A 940 mA0.94 A N/A 120 r/min
DME44B8HPB&8DG50F N/A BB N/A 80 x 80 mm3.15 x 3.15 in N/A 50 N/A 24 V N/A 14.8 W N/A 940 mA0.94 A N/A 72 r/min
DME44B8HPB&8DG75F N/A BB N/A 80 x 80 mm3.15 x 3.15 in N/A 75 N/A 24 V N/A 14.8 W N/A 940 mA0.94 A N/A 48 r/min
DME44B8HPB&8DG100F N/A BB N/A 80 x 80 mm3.15 x 3.15 in N/A 100 N/A 24 V N/A 14.8 W N/A 940 mA0.94 A N/A 36 r/min
DME44B8HPB&8DG150F N/A BB N/A 80 x 80 mm3.15 x 3.15 in N/A 150 N/A 24 V N/A 14.8 W N/A 940 mA0.94 A N/A 24 r/min
Unit of Measure
1