Item # DMN37K8HPB-8DG7.5, DMN37 8DG Series DC Brush Motors with Continuous Operation On Japanese Products Corp.

Long-life : Intermittent operation over 1 million cycles with optimized brush design.
Continuous operating life of 3000 hours.
High output: High heat dissipation and heat resistance achieves higher output
High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
Low noise and increased insulation due to new resin brush holders.
Large selection of gear heads and reduction ratios are available to meet all needs.
Also available with magnetic revolution sensor and noise filter.

Unit of Measure

Specifications | Dimensions | Additional Information | Customize

Product Type	N/A DC Brush Motor
Series	N/A DMN37
Frame Size	N/A 80 x 80 mm3.15 x 3.15 in
Gear Ratio	N/A 7.5
Rated Torque	N/A 20.9 oz·in0.15 N·m
Speed	N/A 480 r/min
Voltage	N/A 24 V
Weight	N/A 810 g1.8 lb
L1	N/A 91.7 mm3.610 in
L2	N/A 32 mm1.260 in
Bolt	N/A M5 x 50 mmM5 x 1.967 in
Note	N/A When ordering, please write the motor model and gearbox model numbers separately, as in the following example: DMN37B8HPB (Pinion shaft motor) 8DG_ (Gearbox)

Outline

DMN37 8DG Series DC Brush Motors with Continuous Operation

Motor Selection Guide

Product Type