Elinco International JPC, Inc.Japanese Products Corp.
Elinco International JPC, Inc. – Corporate Headquarters
1525 Kings Highway East
Fairfield, CT 06824
Phone: 203.334.7537
Fax: 203.334.7792
Email: info@e-jpc.com
Website: www.e-jpc.com
Print Back
  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.
Unit of Measure

Specifications

Product Type

 N/A DC Brush Motor

Series

 N/A DMN29

Frame Size

 N/A 61 x 61 mm1.949 in

Gear Ratio

 N/A 120

Rated Torque

 N/A 97.4 oz·in0.69 N·m

Speed

 N/A 30.8 r/min

Voltage (DC)

 N/A 24 V

Weight

 N/A 350 g0.77 lb

Note

 N/A 6DG gearbox are available with either 4.5 mm diameter mounting holes or M4 x 6mm tapped holes.
  • Gearboxes with 4.5 mm diameter mounting holes are available from stock.
    When ordering, please write the motor model and gearbox model numbers separately, as in the following example:
    DMN29B6HP? (Pinion shaft motor)
    6DG_(Gearbox)
  • Gearboxes with M4 x 6 mm tapped mounting holes are available on request.
    When ordering, please write the combine motor and gearbox model, as in the following example : DMN29B6H( )_
  • Enter the required reduction ration in ( )
  • Enter the required voltage A or B in the _
Rotation of gearbox shaft is in reverse of rotation of motor.

Dimensions


Outline

Additional Information


DMN29 6DG Series DC Brush Motors with Continuous Operation

DMN29 6DG Series DC Brush Motors with Continuous Operation (DMN29B6HPB)

Motor Selection Guide

Customize

N/A Custom Designs