Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Permanent Magnet DC Motors > DMN Series Motors > DMN37 Series Motors > DMN37 8DG Series DC Brush Motors with Continuous Operation > View Items  

DMN37 8DG Series DC Brush Motors with Continuous Operation

 
Check up to five results to perform an action.

  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.



  Results 76 - 100 of 186  1 2 3 4 5 »  

Item #

Frame Size

Gear Ratio

Rated Torque

Speed

Voltage
DMN37K8HPB-8DG12.5 80 x 80 mm
3.15 x 3.15 in 		12.5 34.8 oz·in
0.250 N·m 		288 r/min 24 V
DMN37K8HPA-8DG15 80 x 80 mm
3.15 x 3.15 in 		15 41.7 oz·in
0.29 N·m 		240 r/min 12 V
DMN37K8HPB-8DG15 80 x 80 mm
3.15 x 3.15 in 		15 41.7 oz·in
0.29 N·m 		240 r/min 24 V
DMN37K8HPA-8DG18 80 x 80 mm
3.15 x 3.15 in 		18 50.1 oz·in
0.350 N·m 		200 r/min 12 V
DMN37K8HPB-8DG18 80 x 80 mm
3.15 x 3.15 in 		18 50.1 oz·in
0.350 N·m 		200 r/min 24 V
DMN37K8HPA-8DG25 80 x 80 mm
3.15 x 3.15 in 		25 62.6 oz·in
0.44 N·m 		144 r/min 12 V
DMN37K8HPB-8DG25 80 x 80 mm
3.15 x 3.15 in 		25 62.6 oz·in
0.44 N·m 		144 r/min 24 V
DMN37K8HPA-8DG30 80 x 80 mm
3.15 x 3.15 in 		30 75.1 oz·in
0.53 N·m 		120 r/min 12 V
DMN37K8HPB-8DG30 80 x 80 mm
3.15 x 3.15 in 		30 75.1 oz·in
0.53 N·m 		120 r/min 24 V
DMN37K8HPA-8DG36 80 x 80 mm
3.15 x 3.15 in 		36 90.4 oz·in
0.64 N·m 		100 r/min 12 V
DMN37K8HPB-8DG36 80 x 80 mm
3.15 x 3.15 in 		36 90.4 oz·in
0.64 N·m 		100 r/min 24 V
DMN37K8HPA-8DG50 80 x 80 mm
3.15 x 3.15 in 		50 127 oz·in
0.89 N·m 		72 r/min 12 V
DMN37K8HPB-8DG50 80 x 80 mm
3.15 x 3.15 in 		50 127 oz·in
0.89 N·m 		72 r/min 24 V
DMN37K8HPA-8DG60 80 x 80 mm
3.15 x 3.15 in 		60 153 oz·in
1.1 N·m 		60 r/min 12 V
DMN37K8HPB-8DG60 80 x 80 mm
3.15 x 3.15 in 		60 153 oz·in
1.1 N·m 		60 r/min 24 V
DMN37K8HPA-8DG75 80 x 80 mm
3.15 x 3.15 in 		75 181 oz·in
1.3 N·m 		48 r/min 12 V
DMN37K8HPB-8DG75 80 x 80 mm
3.15 x 3.15 in 		75 181 oz·in
1.3 N·m 		48 r/min 24 V
DMN37K8HPA-8DG90 80 x 80 mm
3.15 x 3.15 in 		90 223 oz·in
1.600 N·m 		40 r/min 12 V
DMN37K8HPB-8DG90 80 x 80 mm
3.15 x 3.15 in 		90 223 oz·in
1.600 N·m 		40 r/min 24 V
DMN37K8HPA-8DG100 80 x 80 mm
3.15 x 3.15 in 		100 250 oz·in
1.8 N·m 		36 r/min 12 V
DMN37K8HPB-8DG100 80 x 80 mm
3.15 x 3.15 in 		100 250 oz·in
1.8 N·m 		36 r/min 24 V
DMN37K8HPA-8DG120 80 x 80 mm
3.15 x 3.15 in 		120 306 oz·in
2.2 N·m 		30 r/min 12 V
DMN37K8HPB-8DG120 80 x 80 mm
3.15 x 3.15 in 		120 306 oz·in
2.2 N·m 		30 r/min 24 V
DMN37K8HPA-8DG150 80 x 80 mm
3.15 x 3.15 in 		150 334 oz·in
2.4 N·m 		24 r/min 12 V
DMN37K8HPB-8DG150 80 x 80 mm
3.15 x 3.15 in 		150 334 oz·in
2.4 N·m 		24 r/min 24 V
  Results 76 - 100 of 186  1 2 3 4 5 »  
Print Back