Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Permanent Magnet DC Motors > DMN Series Motors > DMN37 Series Motors > DMN37 8DG Series DC Brush Motors with Continuous Operation > View Items  

DMN37 8DG Series DC Brush Motors with Continuous Operation

 
Check up to five results to perform an action.

  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.



  Results 51 - 75 of 186  1 2 3 4 5 »  

Item #

Frame Size

Gear Ratio

Rated Torque

Speed

Voltage
DMN37B8HPA-8DG500 80 x 80 mm
3.15 x 3.15 in 		500 556 oz·in
3.9 N·m 		10 r/min 12 V
DMN37B8HPB-8DG500 80 x 80 mm
3.15 x 3.15 in 		500 556 oz·in
3.9 N·m 		10 r/min 24 V
DMN37B8HPA-8DG600 80 x 80 mm
3.15 x 3.15 in 		600 556 oz·in
3.9 N·m 		8.2 r/min 12 V
DMN37B8HPB-8DG600 80 x 80 mm
3.15 x 3.15 in 		600 556 oz·in
3.9 N·m 		8.2 r/min 24 V
DMN37B8HPA-8DG750 80 x 80 mm
3.15 x 3.15 in 		750 556 oz·in
3.9 N·m 		6.7 r/min 12 V
DMN37B8HPB-8DG750 80 x 80 mm
3.15 x 3.15 in 		750 556 oz·in
3.9 N·m 		6.7 r/min 24 V
DMN37B8HPA-8DG900 80 x 80 mm
3.15 x 3.15 in 		900 556 oz·in
3.9 N·m 		5.7 r/min 12 V
DMN37B8HPB-8DG900 80 x 80 mm
3.15 x 3.15 in 		900 556 oz·in
3.9 N·m 		5.7 r/min 24 V
DMN37B8HPA-8DG1500 80 x 80 mm
3.15 x 3.15 in 		1500 556 oz·in
3.9 N·m 		3.5 r/min 12 V
DMN37B8HPB-8DG1500 80 x 80 mm
3.15 x 3.15 in 		1500 556 oz·in
3.9 N·m 		3.5 r/min 24 V
DMN37B8HPA-8DG1800 80 x 80 mm
3.15 x 3.15 in 		1800 556 oz·in
3.9 N·m 		2.9 r/min 12 V
DMN37B8HPB-8DG1800 80 x 80 mm
3.15 x 3.15 in 		1800 556 oz·in
3.9 N·m 		2.9 r/min 24 V
DMN37K8HPA-8DG3 80 x 80 mm
3.15 x 3.15 in 		3 8.49 oz·in
0.060 N·m 		1200 r/min 12 V
DMN37K8HPB-8DG3 80 x 80 mm
3.15 x 3.15 in 		3 8.49 oz·in
0.060 N·m 		1200 r/min 24 V
DMN37K8HPA-8DG3.6 80 x 80 mm
3.15 x 3.15 in 		3.6 10.2 oz·in
0.072 N·m 		1000 r/min 12 V
DMN37K8HPB-8DG3.6 80 x 80 mm
3.15 x 3.15 in 		3.6 10.2 oz·in
0.072 N·m 		1000 r/min 24 V
DMN37K8HPA-8DG5 80 x 80 mm
3.15 x 3.15 in 		5 13.9 oz·in
0.10 N·m 		720 r/min 12 V
DMN37K8HPB-8DG5 80 x 80 mm
3.15 x 3.15 in 		5 13.9 oz·in
0.10 N·m 		720 r/min 24 V
DMN37K8HPA-8DG6 80 x 80 mm
3.15 x 3.15 in 		6 16.7 oz·in
0.12 N·m 		600 r/min 12 V
DMN37K8HPB-8DG6 80 x 80 mm
3.15 x 3.15 in 		6 16.7 oz·in
0.12 N·m 		600 r/min 24 V
DMN37K8HPA-8DG7.5 80 x 80 mm
3.15 x 3.15 in 		7.5 20.9 oz·in
0.15 N·m 		480 r/min 12 V
DMN37K8HPB-8DG7.5 80 x 80 mm
3.15 x 3.15 in 		7.5 20.9 oz·in
0.15 N·m 		480 r/min 24 V
DMN37K8HPA-8DG9 80 x 80 mm
3.15 x 3.15 in 		9 25.0 oz·in
0.180 N·m 		400 r/min 12 V
DMN37K8HPB-8DG9 80 x 80 mm
3.15 x 3.15 in 		9 25.0 oz·in
0.180 N·m 		400 r/min 24 V
DMN37K8HPA-8DG12.5 80 x 80 mm
3.15 x 3.15 in 		12.5 34.8 oz·in
0.250 N·m 		288 r/min 12 V
  Results 51 - 75 of 186  1 2 3 4 5 »  
Print Back