Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Permanent Magnet DC Motors > DMN Series Motors > DMN37 Series Motors > DMN37 8DG Series DC Brush Motors with Continuous Operation > View Items  

DMN37 8DG Series DC Brush Motors with Continuous Operation

 
Check up to five results to perform an action.

  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.



  Results 26 - 50 of 186  1 2 3 4 5 »  

Item #

Frame Size

Gear Ratio

Rated Torque

Speed

Voltage
DMN37B8HPB-8DG50 80 x 80 mm
3.15 x 3.15 in 		50 75.1 oz·in
0.53 N·m 		94 r/min 24 V
DMN37B8HPA-8DG60 80 x 80 mm
3.15 x 3.15 in 		60 90.4 oz·in
0.64 N·m 		78 r/min 12 V
DMN37B8HPB-8DG60 80 x 80 mm
3.15 x 3.15 in 		60 90.4 oz·in
0.64 N·m 		78 r/min 24 V
DMN37B8HPA-8DG75 80 x 80 mm
3.15 x 3.15 in 		75 114 oz·in
0.80 N·m 		63 r/min 12 V
DMN37B8HPB-8DG75 80 x 80 mm
3.15 x 3.15 in 		75 114 oz·in
0.80 N·m 		63 r/min 24 V
DMN37B8HPA-8DG90 80 x 80 mm
3.15 x 3.15 in 		90 136 oz·in
0.96 N·m 		52 r/min 12 V
DMN37B8HPB-8DG90 80 x 80 mm
3.15 x 3.15 in 		90 136 oz·in
0.96 N·m 		52 r/min 24 V
DMN37B8HPA-8DG100 80 x 80 mm
3.15 x 3.15 in 		100 153 oz·in
1.1 N·m 		47 r/min 12 V
DMN37B8HPB-8DG100 80 x 80 mm
3.15 x 3.15 in 		100 153 oz·in
1.1 N·m 		47 r/min 24 V
DMN37B8HPA-8DG120 80 x 80 mm
3.15 x 3.15 in 		120 181 oz·in
1.3 N·m 		39 r/min 12 V
DMN37B8HPB-8DG120 80 x 80 mm
3.15 x 3.15 in 		120 181 oz·in
1.3 N·m 		39 r/min 24 V
DMN37B8HPA-8DG150 80 x 80 mm
3.15 x 3.15 in 		150 195 oz·in
1.400 N·m 		31 r/min 12 V
DMN37B8HPB-8DG150 80 x 80 mm
3.15 x 3.15 in 		150 195 oz·in
1.400 N·m 		31 r/min 24 V
DMN37B8HPA-8DG180 80 x 80 mm
3.15 x 3.15 in 		180 236 oz·in
1.7 N·m 		26 r/min 12 V
DMN37B8HPB-8DG180 80 x 80 mm
3.15 x 3.15 in 		180 236 oz·in
1.7 N·m 		26 r/min 24 V
DMN37B8HPA-8DG225 80 x 80 mm
3.15 x 3.15 in 		225 306 oz·in
2.2 N·m 		21 r/min 12 V
DMN37B8HPB-8DG225 80 x 80 mm
3.15 x 3.15 in 		225 306 oz·in
2.2 N·m 		21 r/min 24 V
DMN37B8HPA-8DG250 80 x 80 mm
3.15 x 3.15 in 		250 334 oz·in
2.4 N·m 		19 r/min 12 V
DMN37B8HPB-8DG250 80 x 80 mm
3.15 x 3.15 in 		250 334 oz·in
2.4 N·m 		19 r/min 24 V
DMN37B8HPA-8DG300 80 x 80 mm
3.15 x 3.15 in 		300 403 oz·in
2.8 N·m 		16 r/min 12 V
DMN37B8HPB-8DG300 80 x 80 mm
3.15 x 3.15 in 		300 403 oz·in
2.8 N·m 		16 r/min 24 V
DMN37B8HPA-8DG360 80 x 80 mm
3.15 x 3.15 in 		360 487 oz·in
3.4 N·m 		13 r/min 12 V
DMN37B8HPB-8DG360 80 x 80 mm
3.15 x 3.15 in 		360 487 oz·in
3.4 N·m 		13 r/min 24 V
DMN37B8HPA-8DG450 80 x 80 mm
3.15 x 3.15 in 		450 556 oz·in
3.9 N·m 		11 r/min 12 V
DMN37B8HPB-8DG450 80 x 80 mm
3.15 x 3.15 in 		450 556 oz·in
3.9 N·m 		11 r/min 24 V
  Results 26 - 50 of 186  1 2 3 4 5 »  
Print Back