Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Permanent Magnet DC Motors > DMN Series Motors > DMN37 Series Motors > DMN37 Series DC Brush Motors > View Items  

DMN37 Series DC Brush Motors

 
Check up to five results to perform an action.

  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.



  Results 1 - 7 of 7 1 

Item #

Rated Output

Voltage (DC)

Rated Torque

Current Rating

Rated Speed

Current (No Load)

Diameter
DMN37SA 4.6 W 12 V 9.8 mN·m
1.39 oz·in 		780 mA
0.78 A 		4500 r/min 0.26 A 1.102 in
28 mm
DMN37SB 4.6 W 24 V 9.8 mN·m
1.39 oz·in 		370 mA
0.37 A 		4500 r/min 0.12 A 1.102 in
28 mm
DMN37BA 7.2 W 12 V 14.7 mN·m
2.09 oz·in 		1010 mA
1.01 A 		4700 r/min 0.25 A 1.102 in
28 mm
DMN37BB 7.2 W 24 V 14.7 mN·m
2.09 oz·in 		530 mA
0.53 A 		4700 r/min 0.13 A 1.102 in
28 mm
DMN37KA 9.2 W 12 V 24.5 mN·m
3.48 oz·in 		1200 mA
1.20 A 		3600 r/min 0.27 A 1.102 in
28 mm
DMN37KB 9.2 W 24 V 24.5 mN·m
3.48 oz·in 		600 mA
0.60 A 		3600 r/min 0.14 A 1.102 in
28 mm
DMN37JB 14.7 W 24 V 39.2 mN·m
5.56 oz·in 		940 mA
0.94 A 		3600 r/min 0.16 A 1.102 in
28 mm
  Results 1 - 7 of 7 1 
Print Back