Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Permanent Magnet DC Motors > DMN Series Motors > DMN 29 Series Motors > DMN29 43G Series DC Brush Motors with Intermittent Operation > View Items  

DMN29 43G Series DC Brush Motors with Intermittent Operation

 
Check up to five results to perform an action.

  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.



  Results 26 - 34 of 34 1 2 

Item #

Frame Size

Gear Ratio

Rated Torque

Speed

Voltage (DC)
DMN29B43G250B 43 x 43 mm
1.693 x 1.693 in 		250 55.6 oz·in
0.39 N·m 		18.2 r/min 24 V
DMN29B43G300A 43 x 43 mm
1.693 x 1.693 in 		300 55.6 oz·in
0.39 N·m 		15.4 r/min 12 V
DMN29B43G300B 43 x 43 mm
1.693 x 1.693 in 		300 55.6 oz·in
0.39 N·m 		15.4 r/min 24 V
DMN29B43G400A 43 x 43 mm
1.693 x 1.693 in 		400 55.6 oz·in
0.39 N·m 		11.7 r/min 12 V
DMN29B43G400B 43 x 43 mm
1.693 x 1.693 in 		400 55.6 oz·in
0.39 N·m 		11.7 r/min 24 V
DMN29B43G500A 43 x 43 mm
1.693 x 1.693 in 		500 55.6 oz·in
0.39 N·m 		9.5 r/min 12 V
DMN29B43G500B 43 x 43 mm
1.693 x 1.693 in 		500 55.6 oz·in
0.39 N·m 		9.5 r/min 24 V
DMN29B43G600A 43 x 43 mm
1.693 x 1.693 in 		600 55.6 oz·in
0.39 N·m 		8.0 r/min 12 V
DMN29B43G600B 43 x 43 mm
1.693 x 1.693 in 		600 55.6 oz·in
0.39 N·m 		8.0 r/min 24 V
  Results 26 - 34 of 34 1 2 
Print Back