Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Permanent Magnet DC Motors > DMN Series Motors > DMN 29 Series Motors > DMN29 36G Series DC Brush Motors with Intermittent Operation > View Items  

DMN29 36G Series DC Brush Motors with Intermittent Operation

 
Check up to five results to perform an action.

  • Long-life : Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output
  • High strength : High radial load capacity due to robust construction, large diameter output shaft and ball bearings
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.



  Results 1 - 25 of 34 1 2 

Item #

Gear Ratio

Rated Torque

Speed

Voltage (DC)

L1

L2

Diameter
DMN29B36G10A 10 9.04 oz·in
0.064 N·m 		370 r/min 12 V 2.433 in
61.8 mm 		0.780 in
19.8 mm 		1.457 in
37 mm
DMN29B36G10B 10 9.04 oz·in
0.064 N·m 		370 r/min 24 V 2.433 in
61.8 mm 		0.780 in
19.8 mm 		1.457 in
37 mm
DMN29B36G18A 18 13.9 oz·in
0.098 N·m 		206 r/min 12 V 2.531 in
64.3 mm 		0.878 in
22.3 mm 		1.457 in
37 mm
DMN29B36G18B 18 13.9 oz·in
0.098 N·m 		206 r/min 24 V 2.531 in
64.3 mm 		0.878 in
22.3 mm 		1.457 in
37 mm
DMN29B36G20A 20 15.3 oz·in
0.11 N·m 		185 r/min 12 V 2.531 in
64.3 mm 		0.878 in
22.3 mm 		1.457 in
37 mm
DMN29B36G20B 20 15.3 oz·in
0.11 N·m 		185 r/min 24 V 2.531 in
64.3 mm 		0.878 in
22.3 mm 		1.457 in
37 mm
DMN29B36G30A 30 23.6 oz·in
0.17 N·m 		123 r/min 12 V 2.531 in
64.3 mm 		0.878 in
22.3 mm 		1.457 in
37 mm
DMN29B36G30B 30 23.6 oz·in
0.17 N·m 		123 r/min 24 V 2.531 in
64.3 mm 		0.878 in
22.3 mm 		1.457 in
37 mm
DMN29B36G50A 50 36.2 oz·in
0.250 N·m 		74 r/min 12 V 2.630 in
68.8 mm 		0.976 in
24.8 mm 		1.457 in
37 mm
DMN29B36G50B 50 36.2 oz·in
0.250 N·m 		74 r/min 24 V 2.630 in
68.8 mm 		0.976 in
24.8 mm 		1.457 in
37 mm
DMN29B36G60A 60 43.1 oz·in
0.30 N·m 		61.7 r/min 12 V 2.630 in
68.8 mm 		0.976 in
24.8 mm 		1.457 in
37 mm
DMN29B36G60B 60 43.1 oz·in
0.30 N·m 		61.7 r/min 24 V 2.630 in
68.8 mm 		0.976 in
24.8 mm 		1.457 in
37 mm
DMN29B36G75A 75 54.3 oz·in
0.380 N·m 		49.3 r/min 12 V 2.630 in
68.8 mm 		0.976 in
24.8 mm 		1.457 in
37 mm
DMN29B36G75B 75 54.3 oz·in
0.380 N·m 		49.3 r/min 24 V 2.630 in
68.8 mm 		0.976 in
24.8 mm 		1.457 in
37 mm
DMN29B36G100A 100 55.6 oz·in
0.39 N·m 		40.1 r/min 12 V 2.630 in
68.8 mm 		0.976 in
24.8 mm 		1.457 in
37 mm
DMN29B36G100B 100 55.6 oz·in
0.39 N·m 		40.1 r/min 24 V 2.630 in
68.8 mm 		0.976 in
24.8 mm 		1.457 in
37 mm
DMN29B36G120A 120 55.6 oz·in
0.39 N·m 		34 r/min 12 V 2.728 in
69.3 mm 		1.075 in
27.3 mm 		1.457 in
37 mm
DMN29B36G120B 120 55.6 oz·in
0.39 N·m 		34 r/min 24 V 2.728 in
69.3 mm 		1.075 in
27.3 mm 		1.457 in
37 mm
DMN29B36G150A 150 55.6 oz·in
0.39 N·m 		28.4 r/min 12 V 2.728 in
69.3 mm 		1.075 in
27.3 mm 		1.457 in
37 mm
DMN29B36G150B 150 55.6 oz·in
0.39 N·m 		28.4 r/min 24 V 2.728 in
69.3 mm 		1.075 in
27.3 mm 		1.457 in
37 mm
DMN29B36G180A 180 55.6 oz·in
0.39 N·m 		24.4 r/min 12 V 2.728 in
69.3 mm 		1.075 in
27.3 mm 		1.457 in
37 mm
DMN29B36G180B 180 55.6 oz·in
0.39 N·m 		24.4 r/min 24 V 2.728 in
69.3 mm 		1.075 in
27.3 mm 		1.457 in
37 mm
DMN29B36G200A 200 55.6 oz·in
0.39 N·m 		22.2 r/min 12 V 2.728 in
69.3 mm 		1.075 in
27.3 mm 		1.457 in
37 mm
DMN29B36G200B 200 55.6 oz·in
0.39 N·m 		22.2 r/min 24 V 2.728 in
69.3 mm 		1.075 in
27.3 mm 		1.457 in
37 mm
DMN29B36G250A 250 55.6 oz·in
0.39 N·m 		18.2 r/min 12 V 2.728 in
69.3 mm 		1.075 in
27.3 mm 		1.457 in
37 mm
  Results 1 - 25 of 34 1 2 
Print Back