Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Permanent Magnet DC Motors > DME Series Motors with Pulse Generators > DME25 Series Motors > DME25 Series Motors with Gearbox 43G > View Items  

DME25 Series Motors with Gearbox 43G

 
Check up to five results to perform an action.


  • Compact size, high power (0.7W-26W).
  • Variety of line ups (224 mode in all).
  • For variety of gear heads (32 Dia-80 Sq and others).
Features:
  • Long-life: Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 1000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output.
  • High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.


  Results 1 - 25 of 34 1 2 

Item #

Model Code

Motor Frame Size

Gear Ratio

Rated Speed

Rated Voltage

Rated Output

L1
DME25B43G10A BA 43 x 43 mm
1.693 x 1.693 in 		10 580 r/min 12 V 3.0 W 50.8 mm
2.000 in
DME25B43G10B BB 43 x 43 mm
1.693 x 1.693 in 		10 580 r/min 24 V 3.0 W 50.8 mm
2.000 in
DME25B43G18A BA 43 x 43 mm
1.693 x 1.693 in 		18 322 r/min 12 V 3.0 W 53.3 mm
2.098 in
DME25B43G18B BB 43 x 43 mm
1.693 x 1.693 in 		18 322 r/min 24 V 3.0 W 53.3 mm
2.098 in
DME25B43G20A BA 43 x 43 mm
1.693 x 1.693 in 		20 290 r/min 12 V 3.0 W 53.3 mm
2.098 in
DME25B43G20B BB 43 x 43 mm
1.693 x 1.693 in 		20 290 r/min 24 V 3.0 W 53.3 mm
2.098 in
DME25B43G30A BA 43 x 43 mm
1.693 x 1.693 in 		30 193 r/min 12 V 3.0 W 53.3 mm
2.098 in
DME25B43G30B BB 43 x 43 mm
1.693 x 1.693 in 		30 193 r/min 24 V 3.0 W 53.3 mm
2.098 in
DME25B43G50A BA 43 x 43 mm
1.693 x 1.693 in 		50 116 r/min 12 V 3.0 W 55.8 mm
2.197 in
DME25B43G50B BB 43 x 43 mm
1.693 x 1.693 in 		50 116 r/min 24 V 3.0 W 55.8 mm
2.197 in
DME25B43G60A BA 43 x 43 mm
1.693 x 1.693 in 		60 96.6 r/min 12 V 3.0 W 55.8 mm
2.197 in
DME25B43G60B BB 43 x 43 mm
1.693 x 1.693 in 		60 96.6 r/min 24 V 3.0 W 55.8 mm
2.197 in
DME25B43G75A BA 43 x 43 mm
1.693 x 1.693 in 		75 77.3 r/min 12 V 3.0 W 55.8 mm
2.197 in
DME25B43G75B BB 43 x 43 mm
1.693 x 1.693 in 		75 77.3 r/min 24 V 3.0 W 55.8 mm
2.197 in
DME25B43G100A BA 43 x 43 mm
1.693 x 1.693 in 		100 58 r/min 12 V 3.0 W 55.8 mm
2.197 in
DME25B43G100B BB 43 x 43 mm
1.693 x 1.693 in 		100 58 r/min 24 V 3.0 W 55.8 mm
2.197 in
DME25B43G120A BA 43 x 43 mm
1.693 x 1.693 in 		120 48.3 r/min 12 V 3.0 W 58.3 mm
2.295 in
DME25B43G120B BB 43 x 43 mm
1.693 x 1.693 in 		120 48.3 r/min 24 V 3.0 W 58.3 mm
2.295 in
DME25B43G150A BA 43 x 43 mm
1.693 x 1.693 in 		150 40.1 r/min 12 V 3.0 W 58.3 mm
2.295 in
DME25B43G150B BB 43 x 43 mm
1.693 x 1.693 in 		150 40.1 r/min 24 V 3.0 W 58.3 mm
2.295 in
DME25B43G180A BA 43 x 43 mm
1.693 x 1.693 in 		180 35.2 r/min 12 V 3.0 W 58.3 mm
2.295 in
DME25B43G180B BB 43 x 43 mm
1.693 x 1.693 in 		180 35.2 r/min 24 V 3.0 W 58.3 mm
2.295 in
DME25B43G200A BA 43 x 43 mm
1.693 x 1.693 in 		200 32.5 r/min 12 V 3.0 W 58.3 mm
2.295 in
DME25B43G200B BB 43 x 43 mm
1.693 x 1.693 in 		200 32.5 r/min 24 V 3.0 W 58.3 mm
2.295 in
DME25B43G250A BA 43 x 43 mm
1.693 x 1.693 in 		250 27.2 r/min 12 V 3.0 W 58.3 mm
2.295 in
  Results 1 - 25 of 34 1 2 
Print Back