Elinco International JPC, Inc.Japanese Products Corp.
Elinco International JPC, Inc. – Corporate Headquarters
1525 Kings Highway East
Fairfield, CT 06824
Phone: 203.334.7537
Fax: 203.334.7792
Email: info@e-jpc.com
Website: www.e-jpc.com
Print Back
  • Industrial motor shaft couplings
  • Large parallel misalignment capacity
  • High torque capacity
  • Large shaft diameters
  • Keyways available
This versatile series of couplings provides you with a full range of torque capacities and bore sizes, all with 1/32-inch parallel misalignment capability. These couplings attach to shafts with your choice of integral clamps or set screws. Combine this with optional keyways and the MC Series is tailor-made for your application.

From medium-duty (aluminum) to heavy-duty (stainless steel), this series provides solutions for a wide range of applications. From pumps and lead screws to conveyors, chances are an MC Series coupling will fit your needs. Available in 7075-T6 aluminum alloy or 17-4 PH corrosion resistant steel (CRES)
Unit of Measure

Specifications

Product Type

 N/A Coupling

Series

 N/A MC7

Material

 N/A 17-4 High Strength Stainless Steel

Finish

 N/A Natural

Outside Diameter Designator

 N/A 125

Outside Diameter (D)

 N/A 1 1/4 in

Length (L)

 N/A 2.37 in

Bore Diameter

 N/A 0.625 in15.88 mm

Bore Designator

 N/A 20
Momentary Dynamic Torque1 N/A 54 lb·in

Torsional Rate

 N/A 0.210 degree/lb·in
Inertia2 N/A 3.8 x 10-5 lb.in.sec2
Screw Size3 N/A 1/4 - 28

Seating Torque

 N/A 65 lb·in

Center Line

 N/A 0.20 in

Min. Size

 N/A 0.313 in7.95 mm

Max. Size

 N/A 0.630 in16.00 mm

Max. Bore Diameter

 N/A 0.750 in19.05 mm

Bore Depth

 N/A 0.51 in12.95 mm

Features

 N/A
  • Industrial motor shaft couplings
  • Large parallel misalignment capacity
  • High torque capacity
  • Large shaft diameters
  • Keyways available
This versatile series of couplings provides you with a full range of torque capacities and bore sizes, all with 1/32-inch parallel misalignment capability. These couplings attach to shafts with your choice of integral clamps or set screws. Combine this with optional keyways and the MC Series is tailor-made for your application.
From medium-duty (aluminum) to heavy-duty (stainless steel), this series provides solutions for a wide range of applications. From pumps and lead screws to conveyors, chances are an MC Series coupling will fit your needs. Available in 7075-T6 aluminum alloy or 17-4 PH corrosion resistant steel (CRES).

Note

 N/A
  1. Shaft misalignments:
    Angular 5 degrees
    Parallel Offset 0.030 in. (0.060 in. T.I.R)
    Axial Motion ±0.010 in.
  2. Manufacturing dimensional tolerances unless otherwise specified are:
    fraction ± 1/64
    x.xx ± .01 in.
  3. With integral clamp attachments only, this bore size requires an operating clearance diameter greater than coupling outside diameter.
  4. Inch and metric keyways available.

Additional Information


Additional-Information

Attachment Methods

Helical MC Series Stainless Steel Couplings (mc7100)

Internal Configuration

Ordering Information-MC Series

Customize

N/A Custom Designs

  • 1 Dynamic torque ratings are momentary values. For non-reversing applications, divide by 2. Divide by 4 for reversing applications. Should the torque ratings be marginal for your application.
  • 2 Inertia is based on smallest standard bore diameter.
  • 3 Metric fasteners available on request.