Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Motor Accessories > Flexible Couplings > Helical MC Series Aluminum Couplings > Item # MCAC225-28-24  


Item # MCAC225-28-24, Helical MC Series Aluminum Couplings

  • Industrial motor shaft couplings
  • Large parallel misalignment capacity
  • High torque capacity
  • Large shaft diameters
  • Keyways available
This versatile series of couplings provides you with a full range of torque capacities and bore sizes, all with 1/32-inch parallel misalignment capability. These couplings attach to shafts with your choice of integral clamps or set screws. Combine this with optional keyways and the MC Series is tailor-made for your application.

From medium-duty (aluminum) to heavy-duty (stainless steel), this series provides solutions for a wide range of applications. From pumps and lead screws to conveyors, chances are an MC Series coupling will fit your needs. Available in 7075-T6 aluminum alloy or 17-4 PH corrosion resistant steel (CRES)



 Specifications 

Product Type
Coupling

Series
MCAC

Material
7075-T6 Aluminum Alloy

Finish
Clear Anodize

Outside Diameter Designator
225

Outside Diameter (D)
2 1/4 in

Length (L)
3.50 in

Bore Diameter
0.875 in
22.23 mm

Bore Designator
28

Momentary Dynamic Torque1
233 lb·in

Torsional Rate
0.044 degree/lb·in

Inertia2
21.5 x 10-5 lb.in.sec2

Screw Size3
1/4 - 20

Seating Torque
120 lb·in

Center Line
0.26 in

Min. Size
0.375 in
9.53 mm

Max. Size
0.875 in
22.23 mm

Max. Bore Diameter
1.525 in
38.73 mm

Bore Depth
0.86 in
21.84 mm

Features
  • Industrial motor shaft couplings
  • Large parallel misalignment capacity
  • High torque capacity
  • Large shaft diameters
  • Keyways available
This versatile series of couplings provides you with a full range of torque capacities and bore sizes, all with 1/32-inch parallel misalignment capability. These couplings attach to shafts with your choice of integral clamps or set screws. Combine this with optional keyways and the MC Series is tailor-made for your application.
From medium-duty (aluminum) to heavy-duty (stainless steel), this series provides solutions for a wide range of applications. From pumps and lead screws to conveyors, chances are an MC Series coupling will fit your needs. Available in 7075-T6 aluminum alloy or 17-4 PH corrosion resistant steel (CRES).

Note
  1. Shaft misalignments:
    Angular 5 degrees
    Parallel Offset 0.030 in. (0.060 in. T.I.R)
    Axial Motion ±0.010 in.
  2. Manufacturing dimensional tolerances unless otherwise specified are:
    fraction ± 1/64
    x.xx ± .01 in.
  3. Inch and metric keyways available.
1 Dynamic torque ratings are momentary values. For non-reversing applications, divide by 2. Divide by 4 for reversing applications. Should the torque ratings be marginal for your application.
2 Inertia is based on smallest standard bore diameter.
3 Metric fasteners available on request.



Print Back