Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Permanent Magnet DC Motors > DME Series Motors with Pulse Generators > DME60 Series Motors > DME60 Series Motors with Gearbox 6DG > Item # DME60S6HPB&6DG25  


Item # DME60S6HPB&6DG25, DME60 Series Motors with Gearbox 6DG

  • Compact size, high power (0.7 W-26 W).
  • Variety of line ups (224 mode in all).
  • For variety of gear heads (32 Dia-80 Sq and others).
Features:
  • Long-life: Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 3000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output.
  • High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.



 Specifications 

Product Type
Motor with Gearbox 6DG

Series
DME60

Model Code
SB

Frame Size
61 x 61 mm
2.402 x 2.402 in

Gear Ratio
25

Rated Voltage
24 V

Rated Output
13 W

Current Rating
1000 mA
1.00 A

Rated Torque
0.53 mN·m
74.99 oz·in

Rated Speed
172 r/min

Note
Rotation of gearbox shaft is in reverse of rotation of motor
6DG gearboxes are available with either 4.5 mm diameter mounting holes or M4 x 6 mm tapped holes.
  • Gearboxes with 4.5 mm diameter mounting holes are available from stock. When ordering, please write the motor model and gearbox model numbers separately, as in the following example: DME60B6HPB (Pinion Shaft Motor) 6DG_ (Gearbox)
  • Gearbox with M4 x 6 mm tapped mounting holes are available on request. When ordering, please write the combine motor and gearbox model as in the following example: DME60B6H_B



Print Back