Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Permanent Magnet DC Motors > DME Series Motors with Pulse Generators > DME44 Series Motors > DME44 Series Motors with Gearbox 6DG > Item # DME44S6HPA&6DG1800  


Item # DME44S6HPA&6DG1800, DME44 Series Motors with Gearbox 6DG

  • Compact size, high power (0.7 W-26 W).
  • Variety of line ups (224 mode in all).
  • For variety of gear heads (32 Dia-80 Sq and others).
Features:
  • Long-life: Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 2000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output.
  • High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.



 Specifications 

Product Type
DC Motor with Gearbox 50G

Series
DME44

Model Code
SA

Gear Ratio
1800

Rated Voltage
12 V

Rated Output
9.2 W

Current Rating
1310 mA
1.31 A

Rated Speed
2.3 r/min

Rated Torque
138.87 oz·in
0.98 N·m

Diameter
1.969 in
50 mm

Note
Rotation of Gearbox shaft is in reverse of rotation of motor
6DG gearboxes are available with either 4.5 mm diameter mounting holes or M4 x 6 mm tapped holes.
  • Gearboxes with 4.5 mm diameter mounting holes are available from stock. When ordering, please write the motor model and gearbox model numbers separately, as in the following example: DME44B6HPB (Pinion Shaft Motor) 6DGx (Gearbox)
  • Gearbox with M4 x 6 mm tapped mounting holes are available on request. When ordering, please write the combine motor and gearbox model as in the following example: DME44B6HxB



Print Back