Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Permanent Magnet DC Motors > DME Series Motors with Pulse Generators > DME25 Series Motors > DME25 Series Motors with Gearbox 6DG > Item # DME25B6HP25B & 6DG25  


Item # DME25B6HP25B & 6DG25, DME25 Series Motor with Gearbox 6DG
( Quantity Discount Available )

  • Compact size, high power (0.7W-26W).
  • Variety of line ups (224 mode in all).
  • For variety of gear heads (32 Dia-80 Sq and others).
Features:
  • Long-life: Intermittent operation over 1 million cycles with optimized brush design.
  • Continuous operating life of 1000 hours.
  • High output: High heat dissipation and heat resistance achieves higher output.
  • High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
  • Low noise and increased insulation due to new resin brush holders.
  • Large selection of gear heads and reduction ratios are available to meet all needs.
  • Also available with magnetic revolution sensor and noise filter.



 Specifications 

Product Type
DC Motor with Gearbox 6DG

Series
DME25

Model Code
BB

Motor Frame Size
61 x 49.5 mm
2.402 x 1.949 in

Rated Voltage
24 V

Rated Output
3.0 W

Current Rating
230 mA
0.23 A

Gear Ratio
25

Rated Speed
232 r/min

Rated Torque
12.64 oz·in
0.10 N·m

Note
6DG gearbox are available with either 4.5 mm diameter mounting holes or M4 x 6 mm tapped holes.
  • Gearboxes with 4.5 mm diameter mounting holes are available from stock. When ordering, please write the motor model and gearbox model numbers separately, as in the following example;
    DME25B6HPB (Pinion shaft motor)
    6DG_ (Gearbox)
  • Gearboxes with M4 x 6 mm tapped mounting holes are available on request. When ordering, please write the combine motor and gearbox model, as in the following example ; DME25B6H_B
  • Rotation of gearbox shaft is in reverse of rotation of motor



Print Back