|
Type
|
|
Palm Mini Plus Type Motors
|
|
|
|
Product Type
|
|
DC Motor
|
|
|
|
Series
|
|
FYD
|
|
|
|
Motor Frame Size
|
|
80 x 80 mm
3.1 x 3.1 in
|
|
|
|
Shaft Specification
|
|
Plain Shaft
|
|
|
|
Rated Speed
|
|
1500 r/min
|
|
|
|
Speed Control Range
|
|
200 to 2500 r/min
|
|
|
|
Rated Voltage
|
|
24 V
|
|
|
|
Rated Output
|
|
15 W
|
|
|
|
Max. Instantaneous Torque (in 5 sec.)
|
|
150 mN·m (1500 r/min)
21 oz·in (1500 r/min)
|
|
|
|
Speed Setting Method
|
|
(1) Speed setting by external speed setter (Sold separately: model code Q-R10KB)
(2) Speed setting by external voltage supply 0~10V
|
|
|
|
Speed Setting
|
|
300±5 %
|
|
|
|
Speed Variation (Against Load ±1%)
|
|
0~rated torque at rated voltage and speed
|
|
|
|
Speed Variation (Against Voltage ±1%)
|
|
DC 24 V ± 10 % at rated speed, no load
|
|
|
|
Speed Variation (Against Temperature ±1%)
|
|
20 ± 20ºC at rated voltage and speed, no load
|
|
|
|
Input Signal
|
|
H : Open collector
L : GND (0~0.8V)
Run, Brake, F/R IN
|
|
|
|
Output Signal
|
|
Alarm, Speed Out (Pulse Output), F/R Out
Open Collector Output DC 30 V Max. 10 MA Max.
|
|
|
|
Speed Pulse (Pulse/Revolution)
|
|
30
|
|
|
|
Max. Average Current Rated
|
|
1.4 A
|
|
|
|
Max. Peak Current Rated
|
|
6.6 A
|
|
|
|
Protection Functions
|
|
Over load protection
When an exceeding torque than rated is applied to motor for more than about 5 sec, Stop motor and outputs "L" from "ALARM" in disconnect power supply for more than 1min, in case of alarm release.
|
|
|
|
Operation Temperature
|
|
0~40ºC (no condensation) continuous duty. The motor flange surface temp. must be 80ºC Max. (Ambient temperature 40ºC without heat sink)
|
|
|
|
Motor Dielectric Strength
|
|
Withstand for 1 min. under AC500V 50Hz (Between case and coil)
|
|
|
|
Motor Insulation Resistance
|
|
10 MO MIN. (Between case and coil by DC500V tester)
|
|
|
|
Distinguishing Features
|
|
- Motors are designed in flat shape and in light weight
- A special magnetic circuit design was employed newly. By this design, these motors are in flat shape, and in lighter weight than conventional standard AC motors.
- This series have 61 mm² (2.4 in²). 80 mm² (3.1 in²). 90 mm² (3.5 in²) Flange sizes.
- Compact designed Driver
- "Palm Mini PLUS" Type is the smallest, (for 6 W - 40 W)
- "Simple" Type is a driver of components mounted on a PCB. (for 6 W-15 W)
- "High power Simple" Type Low-cost circuit-board type driver. (25 W W)
- Wide Ranged Speed Control
- Wide range (200 r/min - 2500 r/min), stepless speed control. "High power Simple" Type. (200 r/min - 2000 r/min)
- Very steady characteristics (Feed back control employed).
- Speed pulse output
- Speed pulse output can be used for speed monitoring, simplified position control...
- "Palm Mini PLUS" Type: 30 ppr
- "Simple" "High power Simple" Type: 5ppr dual signal (120° phase difference)
- Direction of rotation signal output
- Direction of rotation can be monitored by this signal. ("Simple" type needs an external circuit.)
- Alarming
- At an over-load condition, the motor stops and an alarm signal is output.
- Gear Head
- Low-cost gear head for FY series is also available.
- Rotor Cover (option) available
- An aluminum heat sink (size: 200 mm x 200 mm, thickness: 2 mm or more) is required.
|
|
|
|
Number of Poles
|
|
10
|
|
|
|
Rated Power
|
|
15 W
|
|
|
