Japanese Products Corp.
120 Fiske St., Fairfield, CT 06825-5524 US
Phone:203.334.7537 • Fax:203.334.7792
E-Mail: info@e-jpc.com • Web site: www.e-jpc.com
All Categories > Brushless DC Motors > FYD Series Brushless DC Motors & Speed Control Drivers > Item # FY8PF15N-D3  


Item # FY8PF15N-D3, Simple Type Motor

  • Motors are designed in flat shape and in light weight
  • A special magnetic circuit design was employed newly. By this design, these motors are in flat shape, and in lighter weight than conventional standard AC motors.
  • This series have 61 mm² (2.4 in²). 80 mm² (3.1 in²). 90 mm² (3.5 in²) Flange sizes.
  • Compact designed Driver
  • "Palm Mini PLUS" Type is the smallest, (for 6 W - 40 W)
  • "Simple" Type is a driver of components mounted on a PCB. (for 6 W-15 W)
  • "High power Simple" Type Low-cost circuit-board type driver. (25 W\40 W)
  • Wide Ranged Speed Control
  • Wide range (200 r/min - 2500 r/min), stepless speed control. "High power Simple" Type. (200 r/min - 2000 r/min)
  • Very steady characteristics (Feed back control employed).
  • Speed pulse output
  • Speed pulse output can be used for speed monitoring, simplified position control...
  • "Palm Mini PLUS" Type: 30 ppr
  • "Simple" "High power Simple" Type: 5ppr dual signal (120° phase difference)
  • Direction of rotation signal output
  • Direction of rotation can be monitored by this signal. ("Simple" type needs an external circuit.)
  • Alarming
  • At an over-load condition, the motor stops and an alarm signal is output.
  • Gear Head
  • Low-cost gear head for FY series is also available.
  • Rotor Cover (option) available
  • An aluminum heat sink (size: 200 mm x 200 mm, thickness: 2 mm or more) is required.



 Specifications 

Type
Simple Type Motors

Product Type
DC Motor

Series
FYD

Motor Frame Size
80 x 80 mm
3.1 x 3.1 in

Shaft Specification
Pinion Shaft

Rated Speed
1500 r/min

Speed Control Range
200 to 2500 r/min

Rated Voltage
24 V

Rated Output
15 W

Speed Setting Method
(1) Speed setting by external speed setter (Sold separately: model code Q-R10KB)
(2) Speed setting by external voltage supply 0~10V

Speed Setting
300±5 %

Speed Variation (Against Load ±1%)
0~rated torque at rated voltage and speed

Speed Variation (Against Voltage ±1%)
DC 24 V ± 10 % at rated speed, no load

Speed Variation (Against Temperature ±1%)
20 ± 20ºC at rated voltage and speed, no load

Input Signal
H : Open collector
L : GND (0~0.8V)
Run, Brake, F/R IN

Output Signal
Alarm Out, HU Out, HV Out
Open Collector Output DC 30 V Max. 10 MA Max.

Speed Pulse (Pulse/Revolution)
5

Max. Average Current Rated
1.4 A

Max. Peak Current Rated
5 A

Protection Functions
Over load protection
When a load exceeding rated torque is applied to motor for more than about 5 sec, Stop motor and outputs "L" from "ALARM" in case of power supply for more than 1 min.

Operation Temperature
0~40ºC (no condensation) continuous duty. The motor flange surface temp. must be 80ºC Max. (Ambient temperature 40ºC without heat sink)

Motor Dielectric Strength
Withstand for 1 min. under AC500V 50Hz (Between case and coil)

Motor Insulation Resistance
10 MO MIN. (Between case and coil by DC500V tester)

Number of Poles
10

Rated Power
15 W



Print Back