Item # KH6065-B9020, 5.60 Volt (V) Voltage KH60 Series 2-Phase Hybrid Stepping Motor (1.8 Degree/Step) On Japanese Products Corp.


	Item # KH6065-B9020, 5.60 Volt (V) Voltage KH60 Series 2-Phase Hybrid Stepping Motor (1.8 Degree/Step)

Features:
High Torque (Up at Peak time 15 to 20% higher than our previous products)

Unit of Measure: Imperial Metric Both

Specifications

Torque Curve

Dimensions

Additional Information

Customize

Type		2-Phase Hybrid Stepping Motor

Motor Frame Size		60 x 60 mm

Rotor Inertia		680 g·cm²

Motor Mass		1.02 kg 36.0 oz

Series		2 Phase Square KH

Motor Frame Size		NEMA 24

Motor Length		65 in 2.559 mm

Shaft Specification		Single Shaft

Step Angle		1.8 deg./step

Voltage per Phase		5.60 V

Current per Phase		2.0 A

Winding Resistance per Phase		2.8 O

Inductance per Phase		3.7 mH/PH

Holding Torque		1.75 mN·m

Winding Method		Unipolar

Insulation Resistance		500 V DC 100 MO min. (at normal temp. and humidity, between lead and case)

Dielectric Strength		500 V AC, 50 Hz for 1 min (at normal temp. & humidity, between lead and case)

Ambient Temperature Range		-10 ~ +50 ºC

Humidity Range for Ambient Temperature		5 ~ 95 % RH (noncondensing)

Storage Temperature Range		-20 ~ +70 ºC

Humidity Range for Storage Temperature		5 ~ 95 % RH (noncondensing)

Max. Temperature Rise (By resistance method)		70 ºK

Holding Torque		1.75 mN·m

Position Accuracy		±10 %

Series Code		KH60

Note		KH60 is ready to two mounting dimensions.

DOWNLOADS


		Technical Data Sheet (PDF, 798KB)

		Technical Data Sheet for KH60 Unipolar 2-Phase Hybrid Stepping Motor (1.8 Degree/Step) (PDF, 1280KB)

Item # KH6065-B9020, 5.60 Volt (V) Voltage KH60 Series 2-Phase Hybrid Stepping Motor (1.8 Degree/Step)