Item # DME60BHFPB&6DG15, DME60 Series Motors with Gearbox 6DGF On Japanese Products Corp.


	Item # DME60BHFPB&6DG15, DME60 Series Motors with Gearbox 6DGF

Features:

Long-life: Intermittent operation over 1 million cycles with optimized brush design.
Continuous operating life of 3000 hours.
High output: High heat dissipation and heat resistance achieves higher output.
High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
Low noise and increased insulation due to new resin brush holders.
Large selection of gear heads and reduction ratios are available to meet all needs.
Also available with magnetic revolution sensor and noise filter.

Unit of Measure: Imperial Metric Both

Specifications

Dimensions

Additional Information

Customize

Product Type		Motor with Gearbox 6DGF

Series		DME60

Model Code		BB

Frame Size		61 x 61 mm 2.402 x 2.402 in

Gear Ratio		15

Rated Voltage		24 V

Rated Output		26 W

Current Rating		1790 mA 1.79 A

Rated Speed		286 r/min

Rated Torque		90.27 oz·in 0.64 N·m

Note		Rotation of gearbox is in reverse of rotation of motor 6DGF gearboxes are available with either 4.5 mm diameter mounting holes or M4 x 6 mm tapped holes. Gearboxes with 4.5 mm diameter mounting holes are available from stock. When ordering, please write the motor model and gearbox model numbers separately, as in the following example: DME60B6HPB (Pinion Shaft Motor) 6DG_F (Gearbox) Gearbox with M4 x 6 mm tapped mounting holes are available on request. When ordering, please write the combine motor and gearbox model as in the following example: DME60B6H_B

Helical W Series Aluminum Couplings



	WAC20-6mm-6mm Helical W Series Aluminum Couplings

Item # DME60BHFPB&6DG15, DME60 Series Motors with Gearbox 6DGF