Item # DME33S6HP30B & 6DG30, DME33 Series Motors with Gearbox 6DG On Japanese Products Corp.


	Item # DME33S6HP30B & 6DG30, DME33 Series Motors with Gearbox 6DG

Features:

Long-life: Intermittent operation over 1 million cycles with optimized brush design.
Continuous operating life of 1000 hours.
High output: High heat dissipation and heat resistance achieves higher output.
High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings.
Low noise and increased insulation due to new resin brush holders.
Large selection of gear heads and reduction ratios are available to meet all needs.
Also available with magnetic revolution sensor and noise filter.

Unit of Measure: Imperial Metric Both

Specifications

Dimensions

Additional Information

Customize

Product Type		DC Motor with Gearbox 6DG

Series		DME33

Model Code		SB

Frame Size		61 x 49.5 mm 2.402 x 1.949 in

Diameter		1.26 in 32 mm

Gear Ratio		30

Rated Output		0.7 W

Rated Voltage		24 V

Current Rating		60 mA 0.06 A

Rated Speed		150 r/min

Rated Torque		4.58 oz·in 0.032 N·m

Note		6DG gearbox are available with either 4.5 mm diameter mounting holes or M4 x 6 mm tapped holes. Gearboxes with 4.5 mm diameter mounting holes are available from stock. When ordering, please write the motor model and gearbox model numbers separately, as in the following example; DME33B6HPB (Pinion shaft motor) 6DG_ (Gearbox) Gearboxes with M4 x 6 mm tapped mounting holes are available on request. When ordering, please write the combine motor and gearbox model, as in the following example ; DME33B6H_B Rotation of gearbox shaft is in reverse of rotation of motor

Helical A Series Aluminum Couplings



	ACR037-2mm-2mm Helical A Series Aluminum Couplings

Item # DME33S6HP30B & 6DG30, DME33 Series Motors with Gearbox 6DG