Item # FWD2B1P15-11, 169 Millinewton Meter (mN·m) Static Torque 2 Phase Closed Loop FWD Series On Japanese Products Corp.


	Item # FWD2B1P15-11, 169 Millinewton Meter (mN·m) Static Torque 2 Phase Closed Loop FWD Series

New 2 phase Control System allows Stepping motor to operate at High Speeds
0.72 can be achieved (same as 5 phase motors) and can be divided by 80 (or 0.009 deg)
Unique out of step position can be detected (only for motor shaft speeds greater than 500 rpm)
Available using our 2 phase Square size 17 and size 23 stepper motors.

Unit of Measure: Imperial Metric Both

Specifications

Torque Curve

Dimensions

Additional Information

Customize

Type		2 Phase Hybrid Square KH Series

Applicable Motor		KH42HM2-951

Motor Frame Size		42 x 42 mm 1.564 x 1.564 in

No. of Phases		2

Basic Resolution		0.72 in

Excitation System		Basic Resolution (Step) Micro Step (n=1, 2, 4, 8, 10, 20, 40, 80)

Current		0.8 A

Rotor Inertia		0.54 x 10³ oz·in²

Power Specifications		24VDC, 2.0A

Driver Mass		0.51 lb

Motor Mass		0.44 lb

Insulation Class (Motor Section)		Equivalent to class

Insulation Resistance (Motor Section)		500VDC 100 MO min

Dielectric Strength (Motor Section)		500VAC 50Hz 1min

Max. Static Torque		169 mN·m 23.9 oz.in

Working Ambient Temperature (Driver Section)		0~+50 ºC

Working Ambient Temperature (Motor Section)		-10~+50 ºC

Working Ambient Humidity (Driver Section)		0~+50 ºC

Working Ambient Humidity (Motor Section)		15~85 %

Storage Ambient Temperature (Driver Section)		0~+50 ºC

Storage Ambient Temperature (Motor Section)		-20~+70 ºC

Storage Ambient Humidity (Driver Section)		35~85 %

Storage Ambient Humidity (Motor Section)		10~85 %

Item # FWD2B1P15-11, 169 Millinewton Meter (mN·m) Static Torque 2 Phase Closed Loop FWD Series