Item # FYD66SD3 61X61, Simple Type Driver On Japanese Products Corp.


	Item # FYD66SD3 61X61, Simple Type Driver

Unit of Measure: Imperial Metric Both

Specifications

Torque Curve

Dimensions

Additional Information

Customize

Type		Simple Type Drivers

Product Type		Driver

Series		FYD

Motor Frame Size		61 x 61 mm 2.4 x 2.4 in

Rated Speed		1500 r/min

Speed Control Range		200 to 2500 r/min

Rated Voltage		24 V

Rated Output		6 W

Speed Setting Method		(1) Speed setting by external speed setter (Sold separately: model code Q-R10KB) (2) Speed setting by external voltage supply 0~10V

Speed Setting		300±5 %

Speed Variation (Against Load ±1%)		0~rated torque at rated voltage and speed

Speed Variation (Against Voltage ±1%)		DC 24 V ± 10 % at rated speed, no load

Speed Variation (Against Temperature ±1%)		20 ± 20ºC at rated voltage and speed, no load

Input Signal		H : Open collector L : GND (0~0.8V) Run, Brake, F/R IN

Output Signal		Alarm Out, HU Out, HV Out Open Collector Output DC 30 V Max. 10 MA Max.

Speed Pulse (Pulse/Revolution)		5

Max. Average Current Rated		0.7 A

Max. Peak Current Rated		2.8 A

Protection Functions		Over load protection When a load exceeding rated torque is applied to motor for more than about 5 sec, Stop motor and outputs "L" from "ALARM" in case of power supply for more than 1 min.

Operation Temperature		0~40ºC (no condensation) continuous duty. The motor flange surface temp. must be 80ºC Max. (Ambient temperature 40ºC without heat sink)

Motor Dielectric Strength		Withstand for 1 min. under AC500V 50Hz (Between case and coil)

Motor Insulation Resistance		10 MO MIN. (Between case and coil by DC500V tester)

Number of Poles		10

Rated Power		6 W

Item # FYD66SD3 61X61, Simple Type Driver