Item # FY6S6-D3, Palm Mini Plus Type Motor On Japanese Products Corp.

Brushless
DC Motors Stepping Motors Permanent Magnet
DC Motors AC Motors Fans and Blowers Gearboxes Motor Accessories Fan Accessories Custom Solutions

Technical Manuals RoHS Compliant
Products Safety Standards

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Brushless DC Motors > Brushless DC Motors > Item # FY6S6-D3


	Item # FY6S6-D3, Palm Mini Plus Type Motor

larger image

Motors are designed in flat shape and in light weight
A special magnetic circuit design was employed newly. By this design, these motors are in flat shape, and in lighter weight than conventional standard AC motors.
This series have 61 mm² (2.4 in²). 80 mm² (3.1 in²). 90 mm² (3.5 in²) Flange sizes.
Compact designed Driver
"Palm Mini PLUS" Type is the smallest, (for 6 W - 40 W)
"Simple" Type is a driver of components mounted on a PCB. (for 6 W-15 W)
"High power Simple" Type Low-cost circuit-board type driver. (25 W\40 W)
Wide Ranged Speed Control
Wide range (200 r/min - 2500 r/min), stepless speed control. "High power Simple" Type. (200 r/min - 2000 r/min)
Very steady characteristics (Feed back control employed).
Speed pulse output
Speed pulse output can be used for speed monitoring, simplified position control...
"Palm Mini PLUS" Type: 30 ppr
"Simple" "High power Simple" Type: 5ppr dual signal (120° phase difference)
Direction of rotation signal output
Direction of rotation can be monitored by this signal. ("Simple" type needs an external circuit.)
Alarming
At an over-load condition, the motor stops and an alarm signal is output.
Gear Head
Low-cost gear head for FY series is also available.
Rotor Cover (option) available
An aluminum heat sink (size: 200 mm x 200 mm, thickness: 2 mm or more) is required.

Unit of Measure: Imperial Metric Both

Specifications

Torque Curve

Dimensions

Additional Information

Customize

Type		Palm Mini Plus Type Motors

Product Type		DC Motor

Series		FYD

Motor Frame Size		61 x 61 mm 2.4 x 2.4 in

Number of Poles		10

Shaft Specification		Plain Shaft

Rated Voltage		24 V

Rated Voltage		24 V

Rated Output		6 W

Rated Torque		39 mN·m 5.6 oz·in

Rated Speed		1500 r/min

Speed Control Range		200 to 2500 r/min

Max. Instantaneous Torque (in 5 sec.)		59 mN·m (1500 r/min) 8.3 oz·in (1500 r/min)

Max. Instantaneous Torque at 1500 r/min (in 5 sec.)		59 mN·m 8.3 oz·in

Speed Setting Method		(1) Speed setting by external speed setter (Sold separately: model code Q-R10KB) (2) Speed setting by external voltage supply 0~10V

Speed Setting		300±5 %

Speed Variation (Against Load ±1%)		0~rated torque at rated voltage and speed

Speed Variation (Against Voltage ±1%)		DC 24 V ± 10 % at rated speed, no load

Speed Variation (Against Temperature ±1%)		20 ± 20ºC at rated voltage and speed, no load

Input Signal		H : Open collector L : GND (0~0.8V) Run, Brake, F/R IN

Output Signal		Alarm, Speed Out (Pulse Output), F/R Out Open Collector Output DC 30 V Max. 10 MA Max.

Speed Pulse (Pulse/Revolution)		30

Max. Average Current Rated		0.7 A

Max. Peak Current Rated		4.2 A

Protection Functions		Over load protection When an exceeding torque than rated is applied to motor for more than about 5 sec, Stop motor and outputs "L" from "ALARM" in disconnect power supply for more than 1min, in case of alarm release.

Operation Temperature		0~40ºC (no condensation) continuous duty. The motor flange surface temp. must be 80ºC Max. (Ambient temperature 40ºC without heat sink)

Motor Dielectric Strength		Withstand for 1 min. under AC500V 50Hz (Between case and coil)

Motor Insulation Resistance		10 MO MIN. (Between case and coil by DC500V tester)

Distinguishing Features		Motors are designed in flat shape and in light weight A special magnetic circuit design was employed newly. By this design, these motors are in flat shape, and in lighter weight than conventional standard AC motors. This series have 61 mm² (2.4 in²). 80 mm² (3.1 in²). 90 mm² (3.5 in²) Flange sizes. Compact designed Driver "Palm Mini PLUS" Type is the smallest, (for 6 W - 40 W) "Simple" Type is a driver of components mounted on a PCB. (for 6 W-15 W) "High power Simple" Type Low-cost circuit-board type driver. (25 W W) Wide Ranged Speed Control Wide range (200 r/min - 2500 r/min), stepless speed control. "High power Simple" Type. (200 r/min - 2000 r/min) Very steady characteristics (Feed back control employed). Speed pulse output Speed pulse output can be used for speed monitoring, simplified position control... "Palm Mini PLUS" Type: 30 ppr "Simple" "High power Simple" Type: 5ppr dual signal (120° phase difference) Direction of rotation signal output Direction of rotation can be monitored by this signal. ("Simple" type needs an external circuit.) Alarming At an over-load condition, the motor stops and an alarm signal is output. Gear Head Low-cost gear head for FY series is also available. Rotor Cover (option) available An aluminum heat sink (size: 200 mm x 200 mm, thickness: 2 mm or more) is required.

Note		Minimum Order Quantity May Apply

Rated Power		6 W

Peak Current		4.2 A

DOWNLOADS


		Technical-Datasheet (PDF, 197KB)

		BLDC Technology Overview (PDF, 1323KB)

Helical W Series Aluminum Couplings



	WAC25-8mm-8mm Helical W Series Aluminum Couplings

Item # FY6S6-D3, Palm Mini Plus Type Motor

Type

Product Type

Series

Motor Frame Size

Number of Poles

Shaft Specification

Rated Voltage

Rated Voltage

Rated Output

Rated Torque

Rated Speed

Speed Control Range

Max. Instantaneous Torque (in 5 sec.)

Max. Instantaneous Torque at 1500 r/min (in 5 sec.)

Speed Setting Method

Speed Setting

Speed Variation (Against Load ±1%)

Speed Variation (Against Voltage ±1%)

Speed Variation (Against Temperature ±1%)

Input Signal

Output Signal

Speed Pulse (Pulse/Revolution)

Max. Average Current Rated

Max. Peak Current Rated

Protection Functions

Operation Temperature

Motor Dielectric Strength

Motor Insulation Resistance

Distinguishing Features

Note

Rated Power

Peak Current